Wireless thermostat set „FS20 STR“

7. Programming the ‘FS20 STR’

Some system settings are preset to a standard program in the factory:

• Heating phase: Comfort temperature 21°C from 6.00 am to 11.00 pm

• Lowering phase: Lowering temperature 17°C from 11.00 pm to 6.00 am



The above settings may of course be changed to adapt them to your individual needs.

a) Setting the comfort temperature and lowering temperature

If the automatic mode is activated (‘Auto’ appears in the LC display and the device switches automatically between comfort and lowering temperatures), a bar in the lower part of the display indicates when in the course of the day the temperature will be adjusted to the comfort setting.

A sun symbol on the display indicates that the comfort temperature is active; a moon symbol indicates that the lowering temperature is active.

Proceed as follows to change the settings:

• Press and hold the ‘ ’ button longer than 3 seconds.

• The comfort temperature is displayed on the LC display. The sun symbol ‘ ’ blinks.

MO DI MI DO FR SA SO

C

24

Figure 10

0 6

12

18

Use the scroller to set the desired comfort temperature. To confirm briefly press the ‘ button.

’

25

• The lowering temperature is then displayed on the LC display. The moon symbol ‘ ’ blinks.

MO DI MI DO FR SA SO

C

24

Figure 11

0 6

12

18

Use the scroller to set the desired lowering temperature. To confirm briefly press the ‘ button.

• The wireless thermostat now returns to the normal operating mode.

’

26