Itamar Medical Ltd.
2.5 Step by step installation instructions
Prior to installation, verify that you are in full system administrator mode with full privileges.
1. Insert the zzzPAT installation CD into the CD drive. The installation program is activated, and the following dialog box appears. If the installation does not start automatically refer to section 2.4.
Figure 2 - zzzPAT installation dialog box zzzPAT 4.2
Figure 3 - zzzPAT License Agreement
Itamar Medical Ltd.
3. After reading the agreement, select I accept the terms in the license agreement and click Next > to continue.
The ‘Customer Information’ dialog box appears.
Figure 4 - Customer Information dialog box
4.
Enter user name, company name and the serial number exactly as it appears on the cover of the zzzPAT installation disk.
The ‘Database Properties" dialog box appears. zzzPAT 4.2
Figure 5 - Database Properties dialog box
Itamar Medical Ltd.
The zzzPAT software can be installed as a standalone or as a client/server configuration.
• "Standalone" - intended for users that do not require sharing that database with other
• zzzPAT stations.
"Client/Server" intended for network installations with multiple zzzPAT stations accessing a central zzzPAT database over the network. If you wish to install this mode it is strongly advised to coordinate the installation with an Itamar Medical representative. Extra training is crucial for proper operation. o The "Server" mode is selected only once prior to installing the "Clients". This installation should be done on the dedicated computer which will serve as the server for the zzzPAT clients. o The "Client" mode is selected only after installing the "Server" and is repeated for
all clients.
2.5.1.1 Standard - Standalone installation only
The zzzPAT Installer will assist in selecting a destination location for the zzzPAT database. If the necessary folder does not exist, zzzPAT Installer will create the folder.
Figure 6 – Database Destination dialog box
If you wish to change the default folder, select the Change button. The 'Choose Folder' dialog appears. zzzPAT 4.2
Itamar Medical Ltd.
Figure 7 – Choose folder dialog box
Make sure you are not selecting a mapped drive. Select OK to Proceed.
The zzzPAT Installer will assist in selecting a destination location for the zzzPAT application files. If you wish to change the default folder, select the Change button.
Figure 8 – Application folder dialog box
The last dialog before standalone installations summarizes your selections.
After reading this summary, press Install to begin the installation. zzzPAT 4.2
Itamar Medical Ltd.
Figure 9 – Ready to Install dialog box
2.5.1.2 Advanced - Server installation only
The following selection will result in Server installation
The Server side installation creates a shared MS-SQL database that is used by multiple zzzPAT stations. Accordingly, the shared database needs to be created only once per site
installation.
Figure 10 – Database Properties with Advanced options dialog box
The zzzPAT Installer will assist in selecting a destination location for the zzzPAT database. zzzPAT 4.2
Itamar Medical Ltd.
Figure 11 – Shared Database dialog box
Press the Change button to enter a UNC path for the database files folder. This folder will be accessed by all zzzPAT users so it needs to be shared in the network with full control permissions for the "Everyone" group.
Note
If you do not want to use the "Everyone" group, please define a group of "zzzPAT" users and grant this group Full Access to this shared folder. In that case you will have to grant the same permissions to the following services:
SQL Server (ZZZSQL)
SQL Server VSS WRITER
The last dialog prior to beginning server installation summarizes your selections.
After reading this summary, press Install to begin the installation.
2.5.1.3 Advanced - Client installation only
The following selection will result in Client installation
Prior to performing a Client side installation a Shared Database installation must be previously performed on a given PC. zzzPAT 4.2
Itamar Medical Ltd.
Figure 12 – Database Properties Advanced (Client) dialog box
The Client installation may also have a local database and during zzzPAT login the user can select to connect to the Shared or Local database. For this option you should check the “With
Local database” check box.
It is not recommended to install the local database option unless offline work is anticipated with the particular computer.
Press Next to define the Shared Database. zzzPAT 4.2
Figure 13 – Shared Database server dialog box
Itamar Medical Ltd.
You can also enter the <name of the computer with the SQL server>\ZZZSQL , i.e.
SQL_PC\ZZZSQL
The zzzPAT installer will identify and display the currently defined database servers. Click
Browse to see the ZZZSQL servers. The shared MS-SQL database can be selected from the list.
Figure 14 – Select Server dialog box
The zzzPAT Installer will assist in selecting a destination location for the zzzPAT application files. If you wish to change the default folder, select the Change button. zzzPAT 4.2
Figure 15 – Applications folder dialog box
Itamar Medical Ltd.
Press Next to proceed.
The last dialog before client installation summarizes your selections.
After reading this summary, press Install to begin the installation.
At the end of the installation the final dialog is displayed.
Figure 16 – Installation completed dialog box
At the end of the installation you should restart your computer
Note
A login name and password are needed to operate this software.
The default administrator login information is:
Login name: 111
Login password: 111
To modify the administrator login name and password, and to add/modify additional users, refer to section 2.9.
!
Warning
•
•
Do not attempt to modify the zzzPAT software.
It is recommended to close other programs when using zzzPAT to prevent possible conflicts.
zzzPAT 4.2
