Defining the USB drive. Itamar Medical Watch-PAT 200, Watch-PAT 100

Itamar Medical Ltd.

y

Backup the entire database of the existing zzzPAT installation (see Database

Wizard, Backup section 7.1.3). y

Select ‘Setup.exe’ from the zzzPAT installation CD-ROM to start the zzzPAT installation program. y

Uninstall the previous zzzPAT version using ‘Add/Remove Programs’ applet from the control panel. y

Follow stages 1-5 in section 2.5.

.

The upgrade will be performed automatically the first time zzzPAT is launched following an upgrade of zzzPAT, only if the database folder remained the same as the previous installation.

2.7 Defining the USB drive

To prepare a new study (File>New Study Details from zzzPAT), you must first define the

USB drive.

WP100 device only: Place the Compact Flash card supplied with the WP100 in the USB drive that is connected to the PC with the zzzPAT software.

WP200 device only: Connect the device to the PC's USB drive using the supplied USB cable. y

Click y

Figure 38).

Select USB Drive in the ‘New Study’ dialog box. The following window will appear: zzzPAT 4.2

Figure 17 - Select USB Drive dialog box y

The USB drive with the Compact Flash card/WP200 device is identified by the zzzPAT, and is listed in this window. Click OK to confirm the drive selection.