SETTING UP ZZZPAT CONFIGURATION. Itamar Medical Watch-PAT 200, Watch-PAT 100

Itamar Medical Ltd.

3 Setting Up zzzPAT Configuration

3.1 Setup>Set USB Drive

Sets the path to the Compact Flash drive (for WP100) or WP200 device.

Figure 21 - Select USB Drive dialog box

3.2 Setup>Directories

Displays the zzzPAT working directory, the name of the currently connected database, the files directory (signal files data) and the USB drive.

Figure 22 - Set Directories dialog box

3.3 Setup>User Settings

The user can change the following Setup parameters by opening the ‘User Settings’ dialog box from Setup>User Settings. ‘User Settings’ setup parameters are stored in the zzzPAT database for each user (either the local database in a standalone installation or the shared access database in a Shared Access installation). zzzPAT 4.2

Itamar Medical Ltd.

Note

In a Shared Access mode, when a user logs in from several zzzPAT stations simultaneously, changes to some of the user configurable settings of zzzPAT may not be saved after the zzzPAT session ends

When all settings changes are completed, click OK to close the Settings dialog box. The following dialog box will open:

Figure 23 - Save settings for current user question

Clicking Yes will save the changes.

Clicking No will exit ‘User Settings’ Dialog Box.

Clicking Cancel will return the last displayed dialog box.

Defines which channels will be presented on the zzzPAT screen, and in what order. This setting is saved in the ‘User Profile’ file.

The Montage page consists of a list of all signal channels available for viewing: y

PAT- PAT signal. y

Heart Rate - Derived from the PAT signal. y

PAT Amplitude - PAT signal enveloppe. y

SaO

2

- Arterial blood Oxygen saturation level. y

Actigraph - Actigraphy signal. y

WP100 or WP200 Stages – REM, Light Sleep, Deep Sleep and Wake stages. y

Body y

Snore zzzPAT 4.2

Itamar Medical Ltd.

Figure 24 - Setting Montage of zzzPAT display

To add a channel:

y

Select the channel in the ‘All Channels’ window and click Add.

To remove a channel:

y

Select the channel in the ‘Channels In Montage’ window and click Remove.

To change the order of appearance of the channels:

y

Select a channel and then click Ï or Ð until you reach the desired order.

Colors Setup page (Figure 25) consists of a list of all the display elements that can be colored, allowing the user to personalize the screens. The example area provides a preview of the selected color scheme. This setting is saved in the ‘User Profile’ file.

To change a color:

y

Select a display element from the list. y

Click Change Color button to select a new color. The preview is displayed in the ‘Example’ area. zzzPAT 4.2

Itamar Medical Ltd.

Figure 25 - Setting colors of zzzPAT display

Note

Be careful not to choose a color that blends into one of the background elements

Defines if and when the ‘Sleep Report’ or ‘Sleep Indices’ report is displayed automatically. zzzPAT 4.2