Itamar Medical Ltd.
Figure 26 - Setting “Sleep Indices” report box
You can select to open a report either after "Load Study and Analyze" by selecting ‘Open report after “Load Study and Analyze”’ or/and for existing study by selecting ‘Open report after “Open Study”’. Both options contain radio-buttons that enable you to select between
Sleep Report and Sleep Indices report. y
When selecting “Sleep Report” report, the sleep report opens automatically. y
When selecting “Sleep Indices” report, the sleep indices report appears automatically on display, and the sleep report opens upon command.
You can select "Enable Sleep Stages Editing" if you want to be able to edit manually the
Sleep stages (see Editing Sleep Stages).
3.4 Setup>General Settings
Only a user, with ‘User Administration’ permission, can change the following Setup parameters by opening the ‘General Settings’ dialog box from Setup>General Settings.
‘General Settings’ are stored in the zzzPAT database (either the local database in a standalone installation or the shared access database in a Shared Access installation).
These settings are global. Modified settings become available to all users. zzzPAT 4.2
Itamar Medical Ltd.
Figure 27 - General Settings Setting Dialog Box – Events Tab
When all settings changes are completed, click OK to close the General Settings dialog box. The following dialog box will open:
Figure 28 - Save settings question
Clicking Yes will save the changes.
Clicking No will exit ‘General Settings’ dialog box.
Clicking Cancel will return the last displayed dialog box.
A list of Event types is listed in the events tab (Figure 27). The list includes event type, long name, short name and category for each event. zzzPAT 4.2
Itamar Medical Ltd.
To Modify an Event in the Settings list:
y
Click on the Event in the list box. The Modify and Default Setting buttons become enabled. y
Click Modify button. ‘Modify Event Definition’ dialog opens. y
Enter the required names in the fields. y
Click ‘OK’ to confirm and exit.
Default Settings reverts to the default event list.
Note
Clicking the Default Settings will revert to default settings losing all user-defined settings.
3.4.2 Setup>General Settings>Medical History
A preliminary list of medical condition descriptions is listed in the Medical History Tab
(Figure 29). zzzPAT 4.2
Figure 29 - General Settings Dialog Box – Medical History Tab
Itamar Medical Ltd.
To add a condition to the list:
y
Type the condition in the ‘Add to Medical History’ box. The Add button becomes enabled. y
Click
To modify a condition:
y
Click on the condition. y
Click y
Type in the desired changes.
To remove a condition from the list:
y
Click on the condition. y
Click y
Click
Default Settings reverts to the default list.
Note
Clicking the Default Settings will revert to default settings losing all user defined setting.
A default list of Medications is listed in the medication tab. zzzPAT 4.2
Itamar Medical Ltd.
Figure 30 - General Settings Dialog Box – Medications Tab
To add a Medication to the list:
y
Insert Medication name in the ‘Add to Medication’ text box. The Add button becomes enabled. y
Click
To modify a Medication:
y
Click on the listed Medication. y
Click name. y
Type in the change requested.
To remove a Medication from the list:
y
Click on the listed Medication. y
Click
Default Settings reverts to the default list.
Note
Clicking the Default Settings will revert to default settings losing all user defined setting. zzzPAT 4.2
Itamar Medical Ltd.
3.4.4 Setup>General Settings>Custom Fields
Up to three ‘Custom Fields’ can be defined and named by the user. These ‘Custom Fields’ can be used to organize your studies in the ‘Select Patient Study’ dialog box (Figure 46) and during the Export/Import process. These custom fields are available to all users.
Figure 31 - General Settings Dialog Box – Custom Fields Tab
To enable a custom field:
y
Check the box to the left of the custom field. The Values button becomes enabled. y
Write the title of your choice for this field in the text box (for example CHF). y
Click Values button, the following dialog box will open: zzzPAT 4.2
Itamar Medical Ltd.
Figure 32 - Define Values List Dialog box
To insert a value into the ‘List of Values’ field:
y
Write a value you wish to insert into the ‘Value to add’ text box, the Add and
Remove buttons will become enabled. y
Click
To delete a value from the list of values you created:
y
Click on the value and click Remove. y
Click
Note
Defining values can assist you when entering the information into these fields while preparing a ‘New Study’, but you can also type free text values into these fields.
Used to set up reminders to backup the database, alerts when available disk space is below 1GB and in order to enable features that not enabled by default (import packed studies, multi-night studies and tamper-proof testing). zzzPAT 4.2
Itamar Medical Ltd.
zzzPAT 4.2
Figure 33 - General Settings Dialog Box – General Options Tab y
Select snoring threshold to be used in calculating snoring statistics (3 rd
page of report) – used only in non-USA version. y
Check “Prompt for backup every …” and set the numbers of days to get a reminder message after the last backup of the database was performed. y
Check “Prompt for archive when disk space …” to get an alert message when available disk space is lower than 1GB. y
Check “Enable Packed Studies Import” if you have access to packed studies from ftp uploads. By enabling this option you can import studies that were uploaded by ftp by selecting Tools>Import Packed studies option from the main menu. y
For WP200 only: Enable "Tamper-Proof Testing" if you want to use the
Patient Identification Bracelet. By enabling this option you can select to use the bracelet while preparing a New study (see Preparing a New Study). y
For WP200 only: Check “Enable Multiple Nights" option if you want to enable the Watch-PAT200 recording up to 3 nights in a row while preparing a New study (see Preparing a New Study).
Itamar Medical Ltd.
Note
The "Enable Tamper-Proof Testing" and "Enable Multiple
Nights" options are available only when the WP200 internal
S/W is version 2.2182 and higher. y
Check “Print label during New Study" and set the label Printer and the number of labels if you wish to have labels automatically printed when you prepare
"New Study Details". This feature will work only with pre-defined label printers.
The printers must print at 3 secs/label at a minimum and must be defined by
Itamar Medical. The information printed on the label (2x5 cm) will include the following fields: Patient ID, Patient First and Last name, Date of Compact
Flash preparation and Coverage (field that may be used for additional data such as device #, etc.). The labels may be attached to WP100 or WP200 suitcases as to provide easy identification of the designated patient after the
WP100 or WP200 devices have been initialized with the patient details.
Figure 34 – Label example
Note
Contact Itamar Medical for a list of the supported label printers. zzzPAT 4.2
Itamar Medical Ltd.
3.4.6 Setup>General Settings>Report Appearance
Used to change the basic Report appearance, adding a logo, affiliation, header and footer.
Figure 35 - General Settings Dialog Box – Report Appearance Tab
To add a logo to the sleep report:
y the
(BMP extension) or JPEG (JPG or JPEG extensions) formats. Highlight the logo file and click Open to add the icon. Note that actual Icon size in the report does not exceed 140X100 pixels, therefore larger images will be resized for proper printing. y
To clear the selected logo click Clear Logo.
To add a header/footer to the sleep report:
y
Type in the desired header text in the Headers field. y
Type in the desired footer text in the Footer Field.
To set the number of pages of the Sleep Report:
y
Select "One page Sleep Report" to see the results (statistics and signals) page. zzzPAT 4.2
Itamar Medical Ltd.
y
Select "Two pages Sleep Report" (default) to see patient, physician and study information in addition to the "One page Sleep Report". y
Select "Three pages Sleep Report" to see sleep/wake states, sleep stages and respiratory indices charts in addition to "Two pages Sleep Report".
3.4.7 Setup>General Settings>Report Translation
Used to change the sleep report headings.
Figure 36 - General Settings Dialog Box – Report Translation Tab
To translate report headings to a different language:
y
All report field labels may be changed by selecting the desired report field and clicking Modify…. In the dialog box that opens you can type the new text to be used in the reports. y
Click
Note
Clicking the Default Settings will revert to default settings losing all user defined report labels zzzPAT 4.2
Itamar Medical Ltd.
3.4.8 Setup>General Settings>Clinical Diagnosis
To add a Clinical Diagnosis to the list:
y
Insert Clinical Diagnosis name in the ‘Add to Clinical Diagnosis’ text box. The
Add button becomes enabled. y
Click
To modify a Clinical Diagnosis:
y
Click on the listed Clinical Diagnosis. y
Click
Diagnosis name. y
Type in the change requested.
To remove a Clinical Diagnosis from the list:
y
Click on the listed Clinical Diagnosis. y
Click
Default Settings reverts to the default empty list.
Note
Clicking the Default Settings will revert to empty settings losing all user defined setting
3.4.9 Setup>General Settings>Clinical Recommendations
To add a Clinical Recommendations to the list: y
Insert Clinical Recommendations name in the ‘Add to Clinical
Recommendation’ text box. The Add button becomes enabled. y
Click
To modify a Clinical Recommendation:
y
Click on the listed Clinical Recommendations. y
Click
Recommendations name. y
Type in the change requested.
To remove a Clinical Recommendation from the list: y
Click on the listed Clinical Recommendations. y
Click
Note
Clicking the Default Settings will revert to empty settings losing all user defined setting. zzzPAT 4.2
