advertisement
5
5.
Repair Database
5. Repair Database
When the Hard-disk is damaged or you have re-installed the Cam Pro HD system, you should execute the repair database.
Add button:
System will list the current setting record folder(s). If the system has more folders which stored record files, you should click add button to include them all.
Delete button:
Remove a path from the list.
OK button:
Start repair database job.
Cancel button:
Cancel repair database job.
121
AirLive CamPro HD User’s Manual
5. Repair Database
5.1 Repair database status:
When the repair database job is running, the repair percentage and remain time will display on the status bar.
If you want to cancel the repair job, please click the close button on the right-up corner.
The repair job is done once the finished message box popped up.
AirLive CamPro HD User’s Manual 122
advertisement
Related manuals
advertisement
Table of contents
- 8 Overview
- 9 Before Installing the Software
- 9 Starting the Installation
- 13 1.3.1 Install IP Camera(s)
- 13 1.3.2 Add IP Camera(s)
- 34 Main-console
- 39 2.4.1 Define display camera(s) sequence
- 40 2.4.2 Digital Zoom at sub-screen
- 40 2.4.3 Switch to Full screen
- 41 2.4.4 Snapshot of sub-screen
- 42 2.4.5 Restore quad default
- 43 2.5.1 System page at System setup dialog
- 47 2.5.2 Camera page at System setup dialog
- 54 2.5.3 User page at System setup dialog
- 58 2.5.4 Address Book page at System setup dialog
- 59 2.5.5 Notification page at System setup dialog
- 59 SMTP Setting
- 62 2.5.6 Muti-Monitor at System setup dialog
- 63 2.5.7 Joystick at System setup dialog
- 66 2.6.1 Schedule mode
- 67 2.6.2 Select camera of Daily mode
- 67 2.6.3 Select weekday of Weekly mode
- 69 2.6.4 Select camera of special day mode
- 69 2.6.5 Add or remove special day
- 70 2.6.6 Add schedule time slice
- 70 2.6.7 Modify schedule time slice
- 71 2.6.8 Remove schedule time slice
- 72 2.6.9 Record Setup Page
- 73 2.6.10 Record Mode
- 73 2.6.11 Record Setting
- 74 2.6.12 Motion Configuration
- 75 2.6.13 DI Record Setting
- 75 2.6.14 Complete Schedule Setting
- 77 2.7.1 Alarm Event Report
- 79 2.8.1 Camera list
- 79 2.8.2 Add camera to Map
- 79 2.8.3 Make camera as a focus camera
- 79 2.8.4 Move camera on Map
- 79 2.8.5 Rotate camera on Map
- 80 2.8.6 Delete camera on Map
- 80 2.8.7 Change Map
- 82 2.10.1 Speed control
- 83 2.10.2 Direction control
- 84 2.10.3 Tour control
- 84 2.10.4 Preset control
- 84 2.10.5 Auto pan control
- 84 2.10.6 Zoom control
- 84 2.10.7 Focus control
- 84 2.10.8 IRIS control
- 86 2.11.1 Event Setting / Add Event
- 87 2.11.2 Event Setting / Edit Event
- 91 2.11.3 Event Setting / Delete Event
- 91 2.11.4 Event Setting / Add Action
- 91 2.11.5 Event Setting / Edit Action
- 93 2.11.6 Event Setting / Delete Action
- 93 2.11.7 Event Setting / Clone Event setting
- 94 2.12.1 Autorun Server
- 94 2.12.2 Start Server
- 95 2.12.3 Stop Server
- 95 2.12.4 HTTP Port
- 95 2.12.5 RTSP Port
- 95 2.12.6 Remote Playback Port
- 99 Playback
- 101 3.1.1 Search history file(s) dialog
- 101 3.1.2 Select a day to search history file(s)
- 102 3.1.3 Select record mode(s) / Event Type
- 102 3.1.4 Start search
- 102 3.1.5 Review history record file(s) in search period
- 103 3.1.6 Assign time period of search result
- 103 3.1.7 Select the camera(s) to playback
- 103 3.1.8 Start playback history file(s)
- 104 3.2.1 Play button
- 104 3.2.2 Pause button
- 104 3.2.3 Backward play button
- 104 3.2.4 Stop button
- 104 3.2.5 Next frame button
- 104 3.2.6 Previous frame button
- 105 3.2.7 Playback speed control
- 105 3.2.8 Division control buttons
- 106 3.3.1 Convert file dialog
- 107 3.3.2 Select a day to covert history file(s)
- 107 3.3.3 Assign time slice to convert job
- 107 3.3.4 Select cameras to convert job
- 107 3.3.5 Select a folder to save converted file
- 107 3.3.6 Start converting job
- 109 3.6.1 Snapshot all dialog
- 109 3.6.2 Select snapshot image
- 110 3.6.3 Select snapshot folder
- 110 3.6.4 Select file format
- 110 3.6.5 Save snapshot images
- 110 3.6.6 Saved image file name
- 111 3.7.1 Backup dialog
- 111 3.7.2 Select date and time of backup slice
- 111 3.7.3 Select backup camera(s) and backup time period
- 112 3.7.4 Select output directory
- 112 3.7.5 Start backup job
- 112 3.7.6 Playback backup files
- 114 3.9.1 Define display camera(s) sequence
- 114 3.9.2 Digital Zoom at sub-screen
- 115 3.9.3 Switch to Full screen
- 115 3.9.4 Snapshot of sub-screen
- 117 3.9.5 Motion Search
- 119 3.9.6 Sequential Search
- 122 Remote Service
- 125 4.6.1 Camera setup page
- 126 4.6.2 System setup page
- 126 4.6.3 Notification setup page
- 126 4.6.4 EMap
- 126 4.6.5 Alarm setup / Action setup / Play alarm sound
- 127 4.6.6 Event trigger alarm sound action
- 127 4.6.7 Remote service doesn’t support Joystick
- 127 4.6.8 Remote service doesn’t support Import / Export setting
- 128 Repair Database
- 130 Un-install