Software Settings
3.1
Selecting the Ethernet Module
Selecting the Quantum NOE Ethernet Module
General description
After configuring Ethernet communication (see: Add a new network to the
Communication folder, p. 18) the Ethernet module parameters can be configured.
When you select the model family, all the corresponding communication module configuration options are displayed automatically. The module services allow the following settings to be made.
Table of module service configuration options:
Setting
No
Yes
Web
Description
Setting deactivated
Setting activated. Parameters are set using the Unity Pro menu window.
Setting activated. Parameters are set using the configured NOE Web pages.
Unity Pro menu window deactivated.
Not available for every model family.
Note: The availability of the displayed settings depends on the selected model family and can vary.
The screen shot shows an example of the menu window of the Ethernet module
NOE 771 x1 (TCP/IP 10/100 Regular connection).
ETHERNET_1
Model Family
TCP/IP 10/100 Regular Connection
Module IP Address
IP Address
0 . 0 . 0 . 0
Subnetwork Mask
0 . 0 . 0 . 0
Modul Address
Rack Module
Gateway Address
0 . 0 . 0 . 0
Module Utilities
YES Access Control
YES
YES
I/O Scanning
Global Data
YES
YES
SNMP
Address Server
Parameter description
Parameter
Model family
Slot
Module services
IP address of the module
Description
Quantum NOE Ethernet Module settings
Not used
For module service configuration options, see above.
Overview of the IP address parameter set.
27
Software Settings
After selecting the model family TCP/IP 10/100 Regular Connection, the following mask appears. The image also displays the activated module services.
ETHERNET_1
Model Family
TCP/IP 10/100 Regular Connection
Module IP Address
IP Address
0
. 0 . 0 . 0
Subnetwork Mask
0
. 0 . 0 . 0
Modul Address
Rack Module
Gateway Address
0
. 0 . 0 . 0
Module Utilities
YES
Access Control
YES
I/O Scanning
YES
Global Data
YES
SNMP
YES
Address Server
IP Confugration
Access Control
IP Address Configuration
Configured
I/O Sanning
IP adress
Subnetwork mask
Gateway address
From a server
WEB Configurator
Ethernet configuration
Ethernet II
139
. 124 . 10 . 14
255 . 255 . 0 . 0
139 . 124 . 10 . 1
802.3
Global Data SNMP Address Server Bandwidth
Note: The availability of the displayed register depends on the selected model family and can vary.
After selecting the Yes option in module services, the tab corresponding to the module is activated.
28
