vCam-5 User Handbook - Vivax

5 Using the vCam-5 Control Module

Page 10 of 40

NOTE

Note that the drive set as default is shown at the top of the “File” Menu.

5.1.5 Setting the Distance Counter

Setting the Distance Counter tell the control module to display the amount of pushrod deployed in either

Imperial Feet or Metric Meters. This distance deployed will appear of the screen (and recorded videos and pictures) when the feature is activated by using the F2 Info Key. Note that it is important that you verify the actual position and depth with a Sonde Locator or Pipe & Cable Locator before excavating the pipe.

1. Press the F10 Menu twice to bring up the “Setup” menu.

2. Use the Down arrow key to scroll down to the Distance Counter selection.

3. Use the Right arrow key to bring up choices of Feet or Meter.

4. Use the Up/Down arrow keys to make your selection and press the Enter key .

5. Use the Left arrow key or ESC key to return to the Setup Menu.