Setting the Number of Copies and Printing Order. Canon PIXMA MG6850, PIXMA MG6851, PIXMA MG6853, PIXMA MG6840, Pixma MG6852, PIXMA MG6800 series

Setting the Number of Copies and Printing Order

The procedure for specifying the number of copies and printing order is as follows:

You can also set the number of copies on the Quick Setup tab.

1. Open the printer driver setup window

2. Specify the number of copies to be printed

For Copies on the Page Setup tab, specify the number of copies to be printed.

3. Specify the print order

Check the Print from Last Page check box when you want to print from the last page in order, and uncheck the check box when you want to print from the first page.

Check the Collate check box when you are printing multiple copies of a document and want to print out all pages in each copy together. Uncheck this check box when you want to print all pages with the same page number together.

• Print from Last Page: /Collate:

• Print from Last Page: /Collate:

• Print from Last Page: /Collate:

399

• Print from Last Page: /Collate:

4. Complete the setup

Click OK.

When you execute print, the specified number of copies will be printed with the specified printing order.

Important

• When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software. When you specify the number of copies and the printing order with both the application software and this printer driver, the number of copies may be multiplied numbers of the two settings or the specified printing order may not be enabled.

• Print from Last Page appears grayed out and is unavailable when Tiling/Poster is selected for Page

Layout.

• When Booklet is selected for Page Layout, Print from Last Page and Collate appear grayed out and cannot be set.

• When Duplex Printing is selected, Print from Last Page appears grayed out and cannot be set.

Note

• By setting both Print from Last Page and Collate, you can perform printing so that papers are collated one by one starting from the last page.

These settings can be used in combination with Normal-size, Borderless, Fit-to-Page, Scaled, and

Page Layout.

400