Setting Your Preferences
43
About user preferences with
Wave-Touch™
Setting clock display (CLO)
The key controls options for preferences. The display will show a digital abbreviation and a value for every preference each time a key is pressed one at a time.
The clock display mode allows you to turn the clock display on or off.
See the example below to change the clock display to OFF.
Example
Please read the following instructions before changing the user preferences functions:
• Press and continue to press USER PREF navigate through the preferences.
to
Step
1. Press and continue to press
USER PREF until you reach the preset
clock display
mode -Fig. 1-.
• Press or to toggle between options for each preference.
2. Use the +hi & -lo to toggle to the
CLO off option -Fig. 2-.
• Press or to increase or decrease numeric values. You may also use the numeric keys to input precise values.
3. Press START/enter to accept or press CANCEL/off to reject.
• Press START to accept a new option entry or press USER PREF to advance to the next preference.
Fig. 1
• Press CANCEL after pressing START to exit the preferences mode.
Press or
Fig. 2
NOTE
User preference options are not available while cooking or when using the kitchen timer.
Setting clock (CLO)
See the example below to set the clock to 1:30.
Example
Step
1. Press
USER PREF.
2. Enter
1:30 or use +hi/-lo to advance to 1:30.
3. Press START/enter to accept or press CANCEL/off to reject.
Press