Using the External (USB) Keyboard Option (MICOM-3F/3R only). Micom 3T, MICOM-3F M91AMNOKV5-K, MICOM-3T M90AMNOKV5-K, 3R, MICOM-3R M95AMNOKV5-K, 3f

ESC

P

Esc

Familiarization with MICOM-3 Radios

Using the External (USB) Keyboard Option

(MICOM-3F/3R only)

MICOM-3F and MICOM-3R have a USB connector (see pages 4 and 6) for connecting the optional external keyboard with USB connector.

Note

When you plug in the keyboard while the radio operates, the LCD displays for a short time DEVICE RM followed by USB KEYBOARD DETECTS. After these messages, you can start using the keyboard.

While the USB keyboard is connected, you can use it to control the functions normally performed with the keys on MICOM-3 front panel.

Moreover, MICOM-3 accepts entries from both the USB keyboard and its panel: just do not use them at the same instant.

The following table explains the keyboard functions.

Keyboard Key MICOM Panel Key Function

Cancels the last action and reverts to the previous screen.

Pressing ESC for a few seconds initiates AllCall

F1, F2, F3, F4

F5 to F12

F1 F2

–

F3 F4

Action in accordance with current screen

No function

ENTER key

SHIFT and ↑, or ↓

SHIFT @, #, or *

↑, ↓

–

–

Confirm action, save the selection and/or value

Changing the display contrast

Use in AllCall, AnyCall or wildcard modes

Use to scroll values

←, → Display previous/next menu option

Space bar

Backspace

–

Creates a space

Moves the cursor to the left. To delete the character, press F4

WIN key

Number keys

MENU

0 to 9

Display the main menu

Used to enter digits in alphanumeric data

Character key A to Z Used to enter letters in alphanumeric data

To stop using the keyboard, disconnect it from the MICOM-3 USB connector (the disconnection also results in messages that notify you the keyboard has been disconnected).

13