DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
3.2
Pre-Installation Tasks
Before installing the
DIGIPASS Authentication Module
, there are several tasks which need to be completed. Performing these tasks (where applicable) will assist in a quick, smooth installation process.
3.2.1
Installing the Authentication Server
An authentication server should be installed on the network before the DIGIPASS Authentication Module is
installed. For more information about recommended configurations, see 3.1 System Requirements
and 4.3
Configuring the Authentication Server .
CAUTION
If the users are Active Directory users on a Windows platform, it is recommended that the
Use
Windows user name resolution
feature on the authentication server is enabled. This uses
Windows functions to identify users IDs as Windows user accounts, including the domain to which the account belongs.
If the
Use Windows user name resolution
feature is disabled, it is essential that users always use the same login name. If they try to log in using a different form of their Windows account name, their login name will be rejected, unless a second DIGIPASS user account has been created.
3.2.2
Epic Hyperspace
Ensure that the Epic Hyperspace environment is installed and working correctly. The DIGIPASS Authentication
Module needs to be installed on the computer where Epic Hyperspace is running.
The DIGIPASS Authentication Module ProgID " DPAuth4EHS.DPAuthEpicDevice
" should be associated with the
Epic Hyperspace environment.
3.2.3
Information Needed
Before you begin installation of the DIGIPASS Authentication Module, ensure that you have the following information easily accessible, as you will need to enter this during installation.
•
Location (IP address) and port number of the authentication server. To check this, open the authentication server configuration and check the
Component location and SEAL Communicator port fields.
•
Source IP address of the local machine to use when connecting to the Authentication Server (if multiple IP addresses are configured for this machine).
19
DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
3.3
Installing DIGIPASS Authentication for Epic Hyperspace
To install DIGIPASS Authentication for Epic Hyperspace
1.
Locate dp-auth-for-ehs_<version>_x64.msi and start the installation process.
Figure 3: Installing DIGIPASS Authentication Module (1)
20
DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
2.
Read the license agreement text, select I accept the terms in the license agreement, and click
Next.
Figure 4: Installing DIGIPASS Authentication Module (2)
21
DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
3.
Specify the destination folder for DIGIPASS Authentication for Epic Hyperspace and click Next.
The default destination folder (referred to as <installation_folder> in this document) is: C:\Program
Files\VASCO\DIGIPASS Authentication for Epic Hyperspace .
Figure 5: Installing DIGIPASS Authentication Module (3)
22
DIGIPASS Authentication for Epic Hyperspace Administrator Guide
4.
Click Install to start the installation.
Installing DIGIPASS Authentication for Epic Hyperspace
Figure 6: Installing DIGIPASS Authentication Module (4)
23
DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
5.
After successful installation, click Finish to exit the setup program.
The
DIGIPASS Authentication for Epic Hyperspace Configuration Wizard
is started.
24
