DIGIPASS Authentication for Epic Hyperspace Administrator Guide Configuring DIGIPASS Authentication Module
“Servers and Connections” > “ConnectionList” > “Connection0” >
“MinReconnectIntervalSeconds”
The minimum amount of time in seconds that the DIGIPASS Authentication Module will leave between attempts to reconnect to an authentication server after an unsuccessful connect attempt (e.g. server busy).
The default value is 10 .
“Servers and Connections” > “ConnectionList” > “Connection0” >
“MaxReconnectIntervalSeconds”
The maximum amount of time in seconds that the DIGIPASS Authentication Module will leave between attempts to reconnect to an authentication server after an unsuccessful connect attempt (e.g. server busy).
The default value is 10 .
“Servers and Connections” > “ConnectionList” > “Connection0” > “SSL” > “EnableSSL”
Enable/disable the use of SSL when connecting to this authentication server.
The default value is FALSE .
“Servers and Connections” > “ConnectionList” > “Connection0” > “SSL” >
“EnableCustomCertificateArchiveFile”
Enable/disable certificate archive file for use instead of the Windows certificate store.
The default value is FALSE .
“Servers and Connections” > “ConnectionList” > “Connection0” > “SSL” >
“CustomCertificateArchiveFilePath”
Enable file location and name of custom certificate store.
4.2.2.2
Tracing
“Tracing” > “TraceFilePath”
The absolute path and file name of the file to which internal state tracing will be written.
The default value is %LocalAppData%\Vasco\DIGIPASS Authentication for Epic
Hyperspace\Log\DPAuth4EHS.trace.
NOTE
This option is ignored by DIGIPASS Authentication for Epic Hyperspace. Trace logging is always written to the LocalAppData directory for the current user.
“Tracing” > “TraceFileEnable”
Enable/disable tracing.
The default value is FALSE .
“Tracing” > “TraceCodeInfo”
Defines if source code information is traced. Use this for troubleshooting in collaboration with VASCO support.
The default value is FALSE
.
“Tracing” > “TraceProcessInfo”
40
