DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
3.4
Using the DIGIPASS Authentication for Epic Hyperspace Configuration Wizard
After you have finished the installation wizard, the DIGIPASS Authentication for Epic Hyperspace configuration wizard is started automatically. Go through the wizard to define the basic settings for using the DIGIPASS
Authentication Module. Once the wizard is complete, the DIGIPASS Authentication Module configuration file
Setting.xml
is filled with the IAS Server configuration values for Epic Hyperspace, and the DIGIPASS
Authentication Module is ready for use.
For further configuration options and to change your initial settings, use the
DIGIPASS Authentication
Module Configuration Center.
For more information, see 4.1 Using the DIGIPASS Authentication for Epic Hyperspace Configuration Center
and
4.2 Editing the Configuration File .
3.4.1
Configuring DIGIPASS Authentication for Epic Hyperspace
To configure DIGIPASS Authentication for Epic Hyperspace
1.
When the DIGIPASS Authentication Module Configuration Wizard is started, click Next.
The DIGIPASS Authentication Module Configuration Wizard is started automatically after you have completed the installation wizard. Afterward, if you want to modify your settings using the wizard, select
Start > All Programs > DIGIPASS Authentication Modules > DPAuth4EHS Config Wizard.
Figure 7: Using the Configuration Wizard (1)
25
DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
2.
Specify the IP address and SEAL port of the authentication server.
Figure 8: Using the Configuration Wizard (2)
Select an IP address from the list, which contains IP addresses assigned to the current machine. The
DIGIPASS Authentication Module will use the selected IP address exclusively.
26
DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
Figure 9: Using the Configuration Wizard (3)
3.
Specify whether to create an IDENTIKEY Authentication Server client record.
27
DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
Figure 10: Using the Configuration Wizard (4)
• Select Create client record automatically if you want to specify that administrator login for the authentication server to register the DIGIPASS Authentication Module as a client in the authentication server database.
Provide the user name and password to allow administrative access to the authentication server.
•
Select Don’t create client record if the client record for the DIGIPASS Authentication Module already exists in the authentication server database, or you prefer to create it manually.
4.
Review the settings you have specified and click Finish.
28
DIGIPASS Authentication for Epic Hyperspace Administrator Guide Installing DIGIPASS Authentication for Epic Hyperspace
Figure 11: Using the Configuration Wizard (5)
29
