Configuring Tracing. Vasco for Epic Hyperspace

DIGIPASS Authentication for Epic Hyperspace Administrator Guide Configuring DIGIPASS Authentication Module

Figure 14: Configuring Authentication

General

Select

Enable Epic Hyperspace authentication to allow the DIGIPASS Authentication Module to intercept authentication requests using the authentication server.

Authentication

Select

Response-Only and 2-step Challenge/Response login or 1-step Challenge/Response

login to allow the respective authentication modes (see

2.3 Authentication Methods ).

If you are required to allow backup authentication, select Enable Virtual DIGIPASS login.

4.1.4

Configuring Tracing



To configure settings for tracing

1.

Start

DIGIPASS Authentication for Epic Hyperspace Configuration Center

and select

Tracing.

2.

Specify the tracing level (see

2.5 Tracing ).

35