4.5 TV Tuner Setup. Vizio L42, l42hdtv, L42HDTV10A

VIZIO L42 HDTV User Manual

4.5

TV Tuner Setup

When you first used your L42HDTV you will have setup your TV for regular (NTSC) TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV

TUNER SETUP menu.

4.5.1

Tuner Mode

When the MENU button is pressed, the On Screen

Display (OSD) appears on the PICTURE ADJUST page. Press the button to display the TV

TUNER SETUP page for regular (NTSC) TV.

Press the button to highlight the Tuner Mode selection.

Press the button to choose Cable or Air

(Antenna) depending upon which equipment you have attached to the DTV / TV Input.

4.5.2

Auto Search

Press the button to highlight the Auto Search selection.

Press the button to Auto Search for TV channels available. The TV will automatically search for analog and digital channels.

4.5.3

Skip Channel

After the TV has stored all of the available TV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see. Select the channel you wish to remove, press the MENU and buttons to open the TV TUNER SETUP menu and then press the button to highlight SKIP CHANNEL. Press the OK button to select this channel to be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control.

Version 6/26/2006 46

www.VIZIOCE.com