The first group box in the upper-left portion of the Paper tab view is Print Task Quick Sets. This feature is described in the "Finishing tab features" section. Any change to the Print Task Quick Sets group box that is made on the Paper tab affects the group box on the Finishing tab. They are the same option.
Print Task Quick Sets
The Print Task Quick Sets control is available on all of the Document Defaults driver tabs (the Finishing, Effects,
Paper, Basics, and Color tabs). The feature is used to store the current combination of driver settings that are found on all other tabs. Print task quick sets are either preset or user-defined printing specifications, such as paper size and pages per sheet. For more information, see the "Finishing tab features" section of this guide.
Document preview image
The document preview image is a color, line-drawn image of a page that represents graphics and text. The preview image appears in the upper-right corner of all of the Document Defaults and driver tabs (the Finishing, Effects,
Paper, Basics, and Color tabs). For more information about the document preview image, see the "Finishing tab features" section of this document.
Note
Printer image
The bitmap image in the lower-right portion of the Paper tab represents the current physical configuration of the printer and corresponds to its configuration data, which is either obtained automatically through bidirectional communication or configured manually. It should look the same as the image that appears in the same location on the Configure tab.
On the Paper tab, the printer image contains hot spots where you can select a paper source. When the pointer moves over a hot spot, the arrow reverts a gloved hand. The current paper source, whether selected from the drop-down menu or from a printer-image hot spot, is highlighted in bright green on the printer image.
•
The
Auto Select setting in the Source is: drop-down menu does not have a corresponding area to highlight in the printer image. Selecting other settings in this menu highlights the corresponding part in the printer image.
•
Printer-image hotspots on the printer's trays in the bitmapped image are linked to the corresponding tray in the
Source is: option. Manual Feed, which is available from the Source is: option, cannot be selected by selecting the bitmap.
•
On the Paper tab, only Tray 1 has printer-image hot spots.
The printer image shown in the following illustration might differ from your HP Color LaserJet 3700 series printer, depending on the model number and accessory devices.
Software Technical Reference ENWW HP traditional PCL 6 driver features
109
