2.6.2 AIS Controller Update (CONTROLLER UPDATE)
Procedure for updating the AIS controller software
1. Select in the Software Update menu.
2. To update the software, select [ENT]. To cancel update, select [EXIT].
3. Select BAUDRATE (transfer speed). Because BAUDRATE depends on the connected equipment (PC or PDA) to be updated, it is recommended that 38400
BPS be selected.
4. The specified connection method is used to start update.
After update is completed, press [OFF] and [PWR/DIM] at the same time to restart the equipment.
SOFTWARE UPDATE UTC11:44
BRG : RNG NAME / MMSI
270°: 0.18NM
35°: 0.29NM
* 22°: 0.92NM
OCEAN-LINE
JRCMARU
ABCDEFG-MA>
1.TRANSPONDER UPDATE
2.CONTROLLER UPDATE :
BAUDRATE : 38400 BPS
[EXIT] [ENT]
[ENT]
CONTROLLER UPDATE UTC11:44
BRG : RNG NAME / MMSI
270°: 0.18NM
35°: 0.29NM
* 22°: 0.92NM
OCEAN-LINE
JRCMARU
ABCDEFG-MA>
READY FOR CONTROLLER
SOFTWARE UPDATE
[PLEASE RESTART AFTER
SOFTWARE UPDATE]
PRESS AND HOLD [PWR]+[OFF]
Figure 20 CONTROLLER UPDATE Screen
- 3-24 -
