3. Initial Setting (7.INITIAL SETTING)
Selecting 7.INITIAL SETTING from the main menu causes the INITIAL SETTING menu to appear (see Figure 22). (If INITIAL SETTING does not appear in the Main
Menu, turn off the power to the AIS controller once, and then start the equipment in the field maintenance mode [see Section 1.1].)
INITIAL SETTING makes the initial setting of the AIS system and initializes saved the setting in the units. After the setting is made with the menus, press [PWR/DIM] and
[OFF] to turn off the power, and then restart the system.
INITIAL SETTING UTC 11:44
BRG : RNG NAME / MMSI
270°: 0.18NM
35°: 0.29NM
* 22°: 0.92NM
OCEAN-LINE
JRCMARU
ABCDEFG-MA>
1.SENSOR SETTING
2.SHIP STATIC DATA
3.AIS INITIALIZE
4.REMOTE DIAGNOSIS SETTING
Figure 22 INITIAL SETTING Menu Screen
The following items can be set with this menu:
Setting the sensor input ports of the Connection Box
2. SHIP STATIC DATA
Setting the static information of own ship
Returning information saved in this AIS system to the factory-shipped state
Each unit can also be initialized.
4. REMOTE DIAGNOSIS SETTING
Setting the information required for remote maintenance
- 3-27 -
