Sending Scanned Images via E-mail. Canon PIXMA G2501, PIXMA G2400, PIXMA G2500, Pixma G2000 series

Sending Scanned Images via E-mail

You can send scanned images via e-mail.

Note

• The screens for scanning photos are used as examples in the following descriptions.

1.

Start IJ Scan Utility.

2. Click Settings....

The

Settings dialog box appears.

3. Click Photo Scan.

4. Select Attach to e-mail in Application Settings, then select an e-mail client.

331

Note

• You can add e-mail clients to use for attachments from the pull-down menu.

• If None (Attach Manually) is selected, manually attach scanned and saved images to e-mail.

5. Click OK.

The IJ Scan Utility main screen appears.

332

Note

• Refer to the following pages for details on the setting items in the Settings dialog box.

Settings (Auto Scan) Dialog Box

Settings (Document Scan) Dialog Box

Settings (Photo Scan) Dialog Box

Settings (Custom Scan) Dialog Box

Settings (ScanGear) Dialog Box

6. Click Photo.

Scanning starts.

When scanning is completed, the specified e-mail client starts and the images will be attached to a new message.

Note

• Click Cancel to cancel the scan.

• The scanned images are saved according to the settings made in the Settings dialog box.

• When the Check scan results checkbox is selected in the Settings dialog box, the

Save Settings

dialog box

appears. After you set the save options and click OK, the scanned images are saved and automatically attached to a new message of the specified e-mail client.

7. Specify the recipient, enter the subject and message, then send e-mail.

Refer to the manual of your e-mail client for e-mail settings.

333