Unit dimensions. Liebherr HC1540

p lannInG

I nformatIon

Unit Dimensions

- Figure 1, Figure 2

Door Swing Clearance

- Figure 3

Please allow for door swing clearance at locations next to a wall.

The illustrated measurement is without mounted front panels. Be sure to add your panel thickness and handle depth to this measurement in order to avoid interferences.

A = 3" (76 mm)

B = 79-13/16" (2027 mm)

C = 29-7/8" (757 mm)

D = 24" (610 mm)

E = 55 1/4" (1413 mm)

F = 37-1/8" (952 mm)

Figure 1

Figure 3

This type of dimension line indicates the height measured from the floor.

Unit Venting

- Figure 4

HC/HCB appliances do not require any ventilation openings in the cabinet. The required air flow is directed through the toe kick area.

Only use the ventilation grille provided with the appliance. This grille is required for proper operation of the appliance.

This opening must not be covered with a cabinet base.

Failure to use the supplied grille can result in product failure and will void the warranty.

Figure 4

Figure 2

4

p lannInG

I nformatIon

Cabinet Opening Dimensions

- Figure 5

Cabinet

Height

C

80"

84"

Inset cabinet

Depth

B

24" + panel thickness

24" + panel thickness

Frameless/faceframe cabinet

Depth

B

24"

24"

For appliance with panel to be flush, adjacent cabinetry depth must equal appliance depth (24") plus panel thickness (5/8" - 3/4").

The location of the electrical outlet can be within a radius of 80 inch from the appliance top center.

IMPORTANT

Do not install the electrical outlet behind the appliance.

The water line lead-through is at the bottom right of the appliance.

HCB 1560/1561

Water line feed-in from left or right above the anti tipping bracket

Water supply line

30" Single

60" Side by Side

Figure 5

IMPORTANT

Do not install the shut-off valve behind the appliance.

5

p lannInG

I nformatIon

Panel Dimensions - Inset Installation Style

- Figure 6

Side view of cabinet

Cabinet frame

Appliance and panels sit fully within the opening and are flush with what could be its own box, between two pantry cabinets or decorative columns, etc. This is the most common installation scenario.

Door panel

You can order stainless steel panels for inset installation style.

Refrigerator door panel 80"- article number 9900 287-00

Refrigerator door panel 84"- article number 9900 285-00

Freezer drawer panels - article number 9900 283-00

Cabinet opening

A

Refrigerator door panel

B

80" (2032 mm)

84" (2134 mm)

45-1/4" (1150 mm)

49-1/4" (1251 mm)

The panels should be at least 5/8 inch (16 mm) thick to allow the connecting rails to be fastened to them.

IMPORTANT

The maximum panel thickness is 3/4" (19 mm).

The door panel weight must not exceed 60 lb

(27 kg).

Figure 6

6