- Home
- Domestic appliances
- Large home appliances
- Fridge-freezers
- Liebherr
- HC1540
- Installation instructions
advertisement
B lockInG for
s afety
Mounting the Anti Tipping
Device in Cabinets deeper than
25"
- Figures 12 - 13
A proper function of the anti tipping bracket is warranted within a cabinet depth of between 24" and 25". If the cabinet is deeper than 25", a wooden spacer must be mounted between appliance and wall.
Be sure the wooden spacer is fastened securely to the floor.
Cover Strips
- Figure 14
Apply cover strips above, between and below the securing plates on the side walls of the appliance.
Cut the cover strips to the length shown in
Figure 14.
Fit the adhesive cover strips leaving a gap of 1/4" to each securing plate. This ensures problemfree fitting of the covers.
Measuring for mounting the wooden spacer on inset kitchen cabinets -
Figure 12
Depth of spacer depending on clearance between appliance and wall
Figure 14
Panel thickness
Figure 12
Measuring for mounting the wooden spacer on frameless kitchen cabinets -
Figure 13
Depth of spacer depending on clearance between appliance and wall
Figure 13
IMPORTANT
If the floor slopes down sideways, the anti tipping bracket must be fitted horizontally. Lay down spacers in the appropriate positions.
9
advertisement
Related manuals
advertisement
Table of contents
- 4 Unit dimensions
- 4 Door swing clearance
- 4 Unit venting
- 7 frameless cabinet design
- 8 Mounting the anti tipping device
- 8 Mounting options
- 9 deeper than
- 9 Cover strips
- 10 Safety instructions and warnings
- 10 Water connection
- 10 Connection to the water supply
- 12 Leveling the appliance
- 12 Fastening the appliance in the recess
- 13 Adjusting the refrigerator door
- 13 Adjusting the drawer front
- 14 Before mounting the door panels
- 15 onto the door panels
- 16 Mounting the refrigerator door panel
- 18 Mounting the freezer drawer panels
- 18 Mounting the ventilation grille