Technical Publications RT 3200 Advantage

5-1 B-Mode Presetting

Control

▼

B

▼

Enter

Control

B

CONTROL, B will allow you to preset scan parameters for each probe in Band B/M-Modes. When you press PRESET, NEW PATIENT, change the

PROBE or power on/off, the system will return to the preset state. Parameters that can be preset are:

• GAIN

• DYNAMIC RANGE •

• IMAGE INVERT

SCALE

• FOCUS

• IMAGE REVERSE

• MAP/WINDOW

DISPLAY

CONTROL : ___

CONTROL : B___

B-MODE PRESETTING

Adjust the presets while scanning.

Gain, Dynamic Range, Mapping, Focus, Scale, Image Reverse and Image

Invert may be adjusted.

CONTROL : ___

When the ENTER key is pressed, the values of Gain, Dynamic Range,

Focus, Scale, Map, Image Reverse and Image Invert will then be saved as preset values. When the NEW PATIENT, PRESET and PROBE keys are pressed or when the power switch is turned on, the system will be set to the

B-Mode preset values saved for the selected probe.

NOTE: This function is effective only for the probe type currently selected

5-4

CONTROL KEY FUNCTIONS 46-030370 REV 0