advertisement
14
14
GREASING THE RIDE MECHANISMS
● When working with the product, be sure to turn the power off. Working with the power on may cause an electric shock or short circuit.
● Be careful not to damage the wires. Damaged wires may cause an electric shock, short circuit or present a risk of fire.
● Do not touch any parts that are not specified in these directions. Touching unspecified locations may lead to electric shock or cause short circuits.
● This work should be performed by site maintenance personnel or other skilled professionals. Work performed by non-technical personnel can cause a severe accident such as an electric shock.
● To prevent accidents while working or while operating the product after it has been installed, be sure not to conduct any procedures other than those given in this manual. There are cases in which procedures not covered in this manual require special tools and skills. If a procedure not given in this manual is required, request service from the office given in this manual or from the point of purchase.
● Stand back from the cabinet when restoring power after maintenance has been completed. The ride and steering wheel will automatically undergo initialization operation when power is restored. Failure to observe this precaution could result in a collision or fall.
● Do not carelessly touch the ride mechanism. Doing so could result in broken bones or amputation.
When using grease, adhere to all warnings described on the grease’s packaging.
Careless use of grease can present health risks to workers.
- Grease may cause inflammation upon contact with skin. Use gloves for protection, and be careful not to let the grease come in contact with bare skin.
If grease gets into contact with skin, wash thoroughly with soap and water.
- There is a risk of cutting your hands when opening the container of grease. Use gloves for protection.
- The handling of grease is governed by laws and ordinances. Use grease in accordance with the laws and ordinances administered by the area where the facility is located. Unlawful usage can result in environmental pollution. If you are unsure of the laws and ordinances associated with handling grease, consult with the point of purchase of this product.
150
advertisement
Related manuals
advertisement
Table of contents
- 6 HANDLING PRECAUTIONS
- 11 PRECAUTIONS REGARDING INSTALLATION LOCATION
- 11 2-1 LIMITATIONS OF USAGE
- 12 2-2 OPERATION AREA
- 13 PRECAUTIONS REGARDING PRODUCT OPERATION
- 13 3-1 BEFORE OPERATION
- 16 3-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)
- 18 3-3 PRECAUTIONS FOR TICKET OPERATION
- 21 3-4 SWITCHING OFF THE POWER
- 22 PART DESCRIPTIONS
- 25 ACCESSORIES
- 29 ASSEMBLY AND INSTALLATION
- 121 PRECAUTIONS WHEN MOVING THE MACHINE
- 125 PROJECTOR
- 126 8-1 CLEANING THE SCREEN
- 127 8-2 PROJECTOR ADJUSTMENT
- 131 8-3 CHANGING THE LAMP UNIT
- 138 LCD MONITOR
- 138 9-1 CLEANING THE MONITOR SURFACE
- 139 9-2 ADJUSTMENT METHOD
- 141 STEERING WHEEL MECHANISM
- 142 10-1 VOLUME ADJUSTMENT AND REPLACEMENT
- 146 10-2 GREASING
- 147 GEAR SHIFTER
- 147 11-1 GEAR SHIFTER REMOVAL
- 148 11-2 SWITCH REPLACEMENT
- 148 11-3 GREASING
- 149 ACCELERATOR & BRAKE
- 149 12-1 VOLUME ADJUSTMENT AND REPLACEMENT
- 152 12-2 GREASING
- 153 COIN SELECTOR
- 155 GREASING THE RIDE MECHANISMS
- 156 14-1 GREASING THE ACTUATOR
- 161 14-2 GREASING THE GUIDE
- 165 FLUORESCENT LIGHT AND LAMP REPLACEMENT
- 170 PERIODIC INSPECTION
- 173 TROUBLESHOOTING
- 177 GAME BOARD
- 178 18-1 REMOVING THE LINDBERGH
- 182 18-2 COMPOSITION OF THE GAME BOARD
- 183 18-3 SOFTWARE INSTALLATION
- 191 DESIGN-RELATED PARTS
- 193 WIRE COLOR CODE TABLE
- 194 WIRING DIAGRAM