Reader Parameters. Gasboy MDE-4874

Special System Setup Using NBS

Reader Verification - page 4

Use remote verification (reader): checking credit

Use local verification (reader): none (or club)

Check mod 10 (reader): none

Check expiration date (reader): none

Lockout on remote verification: none

Reader default payment is: credit

Console Verification - page 5

Use remote verification (console): checking credit

Use local verification (console): none (or club)

Check mod 10 (console): none

Check expiration date (console): none

Lockout on remote verification: none

Other Parameters - page 8

Host handler channel: (host modem channel) Run NBS -m to change this host channel.

Host handler baud rate: (NBS will assign this) Run NBS -m to change baud rate.

Verification timeout (Routers): 90

Host router data: This line is left blank

More router data: This line is usually left blank

Send requests to host handler: checking credit

Transaction Miscellany - page 11

Bank PIN D.E.S.: yes

Receipt Configuration - page 12

Print manual # on receipt: no

Text used on receipt for odometer: Odometer

Text used on receipt for vehicle number: Vehicle #

Miles per Gallon Package - page 13

Use aux info field for vehicle number: none

Reader Parameters

If fleet cards are accepted, ensure that the auxiliary and odometer reader steps are listed before the verify card step (type 9). To meet Industry PCI requirements, prompts are becoming restrictive in what can be displayed. The following is a list of suggested prompts to be displayed for Vehicle Number and Odometer. If the prompts entered deviate from the table below, it is possible that the reader device may not work correctly.

Vehicle Prompts

ENTER VEHICLE NO

ENTER VEHICLE ID

ENTER VEH TAG

ENTER VEHICLE #

ENTER VEH TAG #

Odometer Prompts

ENTER ODOMETER

ODOMETER NUMBER

ODOMETER READING

ENTER ODOMETER #

ODOMETER #

MDE-4874 CFN Series NBS (GL3) Credit and Debit Card Network - V1.4.0.0 and Later, for CFN III Versions 3.6 and Later · August 2010 Page 33