Console (CONSOLE). Gasboy MDE-4874

Special System Setup Using NBS

Console (CONSOLE)

After running initialization, the parameters are set to these values:

Console Parameter

Allow hand entry of card data

POS asks for odometer on fuel sale

Required Setting

Yes

1 (Card-encoded)

POS asks for auxiliary # on fuel sale 1 (Card-encoded)

POS asks for odometer on merchandise sale 1 (Card-encoded)

POS asks for auxiliary # on merchandise sale 1 (Card-encoded)

The Console parameters for Odometer and Auxiliary prompts must be acceptable to the new

PCI-compliant PIN pads. Review the Reader Parameter section for the acceptable system prompts. If the prompts deviate from the suggested list, the PIN pad will not work correctly.

Refer to MDE-4872 CFN III Configuration Manual for Windows XP Version 3.6 for details on setting up the Console.

Special Card Keys for Manual Entry

If you accept manual entry for certain types of cards at the Profit Point (Wex, Voyager, and

Cenex Regional), the modular Profit Point must be running version 2.3B or later or the integral

Profit Point must be running 3.3B or later.

With NBS, you may need to set up special keys on the Profit Point for handling the manual entry of certain types of cards. After you make the assignment, the keys must be labeled to indicate their new use. The manual-entry process is identical to the standard method of using the

CREDIT

key (which is described in MDE-4355 Profit Point Clerk’s Manual). You must assign keys on the Profit Point, or use special function 68, if you want to manually enter these card types. After you make the assignment, the keys must be labeled to indicate their new use.

On the Profit Point, special function 68 displays the Network card selection menu. You can deactivate the cards you do not want by commenting out, with an asterisk in the first column, the appropriate line in the CONFIG.POS file (refer to MDE-4356 Profit Point Reference

Manual, Set up CONFIG.POS File section).

When changing the CONFIG.POS to include special card types for which you will allow manual entry, you will use three columns in the Setup menu: Network Card, Type, and Prefix.

The following table lists the type and prefix numbers for special network cards accepted by

NBS:

Card

Cenex Regional Card

Cenex Local Card

Voyager

Wex

Type

94

94

97

99

Prefix

00707873

00+6-digit site ID

7088

690046

MDE-4874 CFN Series NBS (GL3) Credit and Debit Card Network - V1.4.0.0 and Later, for CFN III Versions 3.6 and Later · August 2010 Page 35