Ninja BL680REF

Getting To Know Your Nutri Ninja

®

|

Ninja

®

Blender System with Auto-iQ

™

Technology

a b c d e f h

i

g j l k m

a Jumbo Multi-Serve 32 oz. Nutri

Ninja

®

Cup

b Regular 24 oz. Nutri Ninja

® Cup

c Small 18 oz. Nutri Ninja

®

Cup

d Pro Extractor Blades

® Assembly

e Sip & Seal

®

Lids (x3)

f Food Processor Bowl

g Food Processor Lid

h Dough Blade Assembly

(food processor)

i Chopping Blade Assembly

(food processor)

j Blender Pitcher

k Blender Lid

l Stacked Blade Assembly (blender)

m Motor Base www.ninjakitchen.com

5

The Nutri Ninja

®

|

Ninja

®

Blender System with Auto-iQ

™

Technology is a professional, high powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja

®

|

Ninja

®

Blender System with

Auto-iQ ™ Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

Nutri Ninja

®

|

Ninja

®

Blender System with Auto-iQ

™

Technology Features:

• Ninja

®

Blade Technology

• BPA Free Blender Pitcher, Nutri Ninja ® Cups, Food Processor Bowl and Lids

• Drip-Free Pour Spout

• Total Crushing

®

Technology

• LED Control Panel with Timer

• Sturdy, Non-Slip Base

• Smart Lid technology for easy release

• 3 speeds: Low/Dough, Medium, & High

• 5 Auto-iQ ™ settings - Auto-iQ ™ Frozen Drinks/Smoothies, Auto-iQ ™

Nutri Ninja

®

Auto-iQ

™

Ultra Blend and Auto-iQ

™

Pulse

Food Puree, Nutri Ninja ® Auto-iQ ™ Blend,

• Nutri Ninja

®

Nutrient & Vitamin Extraction*

* Extract a Drink Containing Vitamins & Nutrients From Fruits & Veggies

6 1-877-646-5288

Before First Use

PLEASE KEEP THESE IMPORTANT

SAFEGUARDS IN MIND WHEN USING THE

APPLIANCE:

IMPORTANT: Make sure that the motor base is plugged in for use.

IMPORTANT: Never add ingredients into the container before placing the attachment in first.

IMPORTANT: Attachments are not interchangeable.

IMPORTANT: DO NOT attempt to operate the appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

WARNING: Stacked

Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the blender pitcher. Failure to do so will result in a risk of laceration.

WARNING: Stacked

Blade Assembly and Chopping Blade

Assembly are sharp and not locked in place.

If pouring with the lid removed, carefully remove the Stacked

Blade Assembly or Chopping Blade Assembly first, holding it by the shaft. Failure to do so will result in a risk of laceration.

CAUTION: Do not immerse the motor base into water or any other liquid.

1 Remove all packaging material and labels from the appliance. Separate/remove all parts from each other.

2 Wash the lids, blender pitcher, food processor bowl,

Nutri Ninja

®

cups and Blade Assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades.

WARNING: Handle the Stacked Blade Assembly,

Chopping Blade Assembly and Nutri Ninja Blade

Assembly with care when washing, as the blades are sharp.

3 Rinse and air dry thoroughly.

4 The blender pitcher, food processor bowl, Nutri Ninja

® cups, lids, Stacked Blade Assembly, Chopping Blade

Assembly and Nutri Ninja Blade Assembly, are all dishwasher safe. It is recommended that the lids and

Blade Assemblies be placed on the top rack. Ensure that the Blade Assemblies are removed from the containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

www.ninjakitchen.com

7

Assembly and Use for the Blender

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.

WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 3a

OR

HIGH

LOW

SMOOTHIE PUREE

PULSE

DOUGH

FROZEN

BLENDING

SINGLE

SERVE

HIGH

LOW

SMOOTHIE PUREE

PULSE

FROZEN

BLENDING

DOUGH

SINGLE

SERVE

Fig. 5b

Fig. 1 Fig. 2 Fig. 3b

MED

Fig. 4

HIGH

LOW

SMOOTHIE PUREE

PULSE

DOUGH

FROZEN

BLENDING

SINGLE

SERVE

Fig. 5a

1 Review warning and caution statements above before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a counter or table top.

3 Align and lower the Pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of the

“

LOCK” symbol on the motor base.

MED

4 Rotate the blender pitcher clockwise until it clicks in place. As the pitcher rotates, it will lower and the safety tabs on the bottom of the pitcher will slide under the safety tabs on the top of the motor base.

(Fig. 2)

5 The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.

(Fig. 3a, Fig. 3b)

6 Holding the Stacked Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure that the

Stacked Blade Assembly is seated properly and is standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will fit loosely on the drive gear.

7 Add the ingredients to the pitcher, making sure that they do not exceed the highest measured marking line on the side of the pitcher.

NOTE: If you need to add additional ingredients while the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as mixtures of any drinks or smoothies, do not exceed the “MAX” liquid mark (64 ounces) on the pitcher

8 Plug the power cord into the electrical outlet and press the power button ( ).

NOTE: As a safety feature, the power light

( ) will flash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power light ( ) will be solid, indicating that the appliance is ready for use.

9 Holding the lid by the handle in the upright position, place it on top of the pitcher aligning the triangle ( ) located on the lid with the triangle ( ) located on the pitcher’s handle.

(Fig. 5a) Press the handle down until you hear a click. The triangles on the lid and the blender handle

MUST be aligned in order for the blender to turn on.

(Fig. 5b)

8 1-877-646-5288

MED

USE REMOVAL

Fig. 6

Fig. 10

Fig. 7 Fig. 8

Fig. 9

Fig. 11

WARNING: Never leave the appliance unattended while in use.

NOTE: Nutri Ninja

®

| Ninja

®

Blender System with AutoiQ ™ Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base.

(Fig. 6)

10 Press the power button to turn on the unit. Select the speed or Auto-iQ ™ program that best suits your needs. The Auto-iQ

™

program will stop the appliance automatically at the end of the program.

(Fig. 7)

NOTE: Pulse ingredients for even chopping by holding the Auto-iQ ™ is reached.

Pulse button until your desired consistency

11 To pause the appliance, press the selected speed or

Auto-iQ

™

Program a second time.

(Fig. 8)

12 When you have reached your desired consistency, stop the appliance by pressing the power button ( ) and wait for the Stacked Blade Assembly to stop turning.

(Fig. 8)

13 Turn the pitcher counter clockwise to remove and then lift off the base.

(Fig. 9)

WARNING: Never insert your hands in the pitcher as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

14 Open the pour spout cap and use the spout to empty liquid contents.

15 For thicker consistencies, first remove the lid by pressing the release button and pulling the lid handle up to a 90 degree angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher.

(Fig. 10)

16 Make sure that the unit is unplugged when not in use.

17 To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

(Fig. 11)

www.ninjakitchen.com

9