Ninja BL680REF

Assembly and Use for the Nutri Ninja

®

Cups

WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.

WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

ASSEMBLY USE REMOVAL

Fig. 1

Fig. 2 Fig. 3 Fig. 4

NOTE: Nutri Ninja

® | Ninja ® Blender System with Auto-iQ ™

Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base.

(Fig. 1)

1 Review warning and caution statements above before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.

3 Add ingredients to the Nutri Ninja

®

cup.

4 Place the Pro Extractor Blades

®

Assembly onto the cup and tightly screw it on clockwise until you have a good seal.

(Fig. 2)

5 Turn the Nutri Ninja

® cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Rotate the Nutri Ninja

®

cup clockwise until it locks in place, you will hear a click when the lock is engaged. (Fig. 3)

6 Press the power button on, and select the speed or

Auto-iQ

™

program that suits your needs. The Auto-iQ

™ program will stop the appliance automatically at the end of the program.

(Fig. 4)

Fig. 5 Fig. 6

7 To pause the appliance, press the selected speed or

Auto-iQ

™

Program a second time.

8 Once you have reached your desired consistency, turn the power button off. Turn the Nutri Ninja

® cup  counter-clockwise and pull straight up to remove.

(Fig. 5, Fig. 6)

NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max Liquid” line.

9 Turn the cup upright and remove the Pro Extractor

Blades

®

Assembly by twisting the blade assembly counterclockwise.

10 Place the Sip & Seal

®

lid onto the Nutri Ninja

®

cup, twist to seal and enjoy!

11 Make sure that the motor base is unplugged when not in use.

12 To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

(Fig. 7)

Fig. 7

12 1-877-646-5288