Ninja BL680REF

Assembly and Use for the Processor Bowl

WARNING: Chopping Blade Assembly is sharp and not locked in place. Make sure to carefully remove lid and Chopping

Blade Assembly, holding it by the shaft, before emptying contents. Failure to do so will result in a risk of laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use

ASSEMBLY

Fig. 1

Fig. 4a

Fig. 6b

Fig. 2 Fig. 3 Fig. 4b

MED

MED

NOTE: Nutri Ninja

®

| Ninja

®

Blender System with AutoiQ

™

Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base.

(Fig. 1)

1 Review warning and caution statements above before proceeding to number 2.

MED

2 Place the motor base on a clean, dry, level surface such as a counter or table top.

3 Align and lower the Processor Bowl onto the motor base.

(Fig. 2) Handle should be aligned slightly to the right of the “ LOCK” symbol on the motor base.

4 Rotate the bowl clockwise until it locks in place, you will hear a click when the lock is engaged.

(Fig. 3)

5 The bowl can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.

(Fig. 4a, Fig. 4b)

6 Holding the desired blade assembly by the top of the shaft, place it onto the drive gear inside the bowl.

Ensure that the blade assembly is seated properly and is standing upright.

(Fig. 5)

NOTE: The blade assembly will fit loosely on the drive gear.

Fig. 5 Fig. 6a

7 Add the ingredients to the bowl, making sure that they do not exceed the highest measured marking line on the side of the bowl.

8 Holding the lid by the handle in the upright position, place it on top of the Processor Bowl aligning the triangle ( ) located on the lid with the triangle ( ) located on the Processor Bowl handle.

(Fig. 6a) Press the handle down until you hear a click. The triangles on the lid and the Processor Bowl handle

MUST be aligned in order for the blender to turn on.

(Fig. 6b)

NOTE: The 64 oz. bowl is not intended for blending drinks. Do not overfill.

9 Plug the power cord into the electrical outlet and press the power button ( ).

NOTE: As a safety feature, the power button ( ) will flash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power button

( ) will be solid, indicating that the appliance is ready for use.

10 1-877-646-5288

MED

USE

REMOVAL

USE

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5

USING THE CHOPPING BLADE ASSEMBLY

WARNING: Never leave the appliance unattended while in use.

WARNING: Remove utensils prior to processing.

1 Review warning and caution statements on p. 10 before proceeding to number 2.

2 Holding the Chopping Blade assembly by the shaft, place it onto the gear shaft inside the bowl. Ensure that the Chopping Blade assembly fits around the gear shaft and that it is standing straight.

3 Add the ingredients and secure the bowl lid onto the bowl.

(Fig. 1)

4 Plug the power cord into the electrical outlet and press on the power button ( ). Select the speed or Auto-iQ

™ program that best suits your needs. Pulse ingredients for even chopping by holding the Auto-iQ

™

Pulse button until your desired consistency is reached.

NOTE: Please refer to “Speed Settings & Uses” chart for suggested uses and speeds.

5 When you have reached your desired consistency, stop the appliance by pressing the power button ( ) and wait for the Chopping Blade assembly to stop turning.

(Fig. 2)

6 To remove the lid, press the release button on the lid and pull the lid handle up to a 90 ° angle.

(Fig. 2)

7 Turn the bowl counter-clockwise and lift it to remove it from the motor base.

(Fig. 3)

8 To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

(Fig. 4)

USING THE DOUGH BLADE ASSEMBLY

WARNING: Never leave the appliance unattended while in use.

WARNING: Remove utensils prior to processing.

1 Review warning and caution statements on p. 10 before proceeding to number 2.

2 Holding the Dough Blade Assembly by the shaft, place it onto the gear shaft inside the bowl. Ensure that the

Dough Blade assembly fits around the gear shaft and that it is standing straight.

(Fig. 5)

3 Add the ingredients and secure the bowl lid onto the bowl.

4 Plug the power cord into the electrical outlet and press on the power button ( ). Select LOW/DOUGH on the control panel and process until ingredients come together to form a mass.

NOTE: Please refer to “Speed Settings & Uses” chart for suggested uses and speeds.

5 Once finished making dough, stop the appliance by pressing the power button ( ) and wait for the Dough

Blade assembly to stop turning.

6 To remove the lid, press the release button on the lid and pull the lid handle up to a 90

° angle.

(Fig. 2)

7 Turn the bowl counter-clockwise and lift it to remove it from the motor base.

(Fig. 3)

8 To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

(Fig. 4)

www.ninjakitchen.com

11