advertisement
Headlight Bulb
LIGHTING SYSTEM
12.Headlight Bulb
A: REMOVAL
CAUTION:
• Because the halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb’s service life. Hold the flange portion when replacing the bulb. Never touch the glass portion.
• Do not leave the headlight without a bulb for a long time. Dust, moisture, etc. entering the headlight may affect its performance.
1) Disconnect the ground cable from battery.
2) Remove the air intake duct (when removing the headlight RH).
3) Disconnect the harness connector.
4) Remove the rubber cap.
LI-00017
5) Remove the light bulb retaining spring to remove the bulb.
LI-00018
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Attach the rubber cap with letters TOP on the top so the drain hole will be on the lower side.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
LI-16
advertisement
Related manuals
advertisement