Grounding the Chassis. Alcatel-Lucent OmniSwitch 6900

Grounding the Chassis Chassis and Power Supplies

Grounding the Chassis

The switch has a grounding lug located on the rear of the chassis. This lug uses 10-32 screws and is surrounded by a small paint-free area, which provides metal-to-metal contact for a ground connection.

Use this connector to supplement the ground provided by the AC power cord. To do so, install a Panduit

Grounding Lug (type LCD8-10A-L) using 8AWG copper conductors to the paint-free area.

Refer to the rear chassis views on

page 2-2

for location details. page 2-26 OmniSwitch 6900 Hardware Users Guide

September 2011