Maintenance. Amazone GBK / GNK / HR 11 - 13 - 15 - 20 - 25

Overseeding tine bars

The overseeding tine bars combined with the seeder ensure regular and even broadcast overseeding over the whole working surface. This combination can also be used as a combination seeding system on a surface where the soil has already been prepared. Actually, the position of the overseeding tine bars avoid buried stones are retransported to the surface.

Brush Bars

Consolidated ground can be maintained weekly by combining overseeding tine bar in front of the harrow with a brush bar at the rear. After the brush bars have been mounted in front and at the rear of the harrow, the machine carries out all maintenance works on sandy artificial lawns.

4.1.8

Maintenance

The casing of the reciprocating harrow is furnished with an oil-bath lubrication. All bearing systems are equipped with conical roller bearings which do not require any greasing.

It is not necessary to empty the oil. The oil level must be visible through the level inspection glass when the harrow is in horizontal position. For refilling the oil level, use Engler gear oil of a viscosity of 6.5 for a temperature of

50°C according to the SAE 80 standard. It must by all means be ensured that the gear oil is clean and that no impurities enter the casing during the filling process.

The casing cover only has to be unscrewed for repair purposes in order to avoid any risk of a deterioration of the roller bearings.

25