- Computers & electronics
- Computer components
- System components
- Server/workstation motherboards
- User manual
advertisement
Connector/Header Locations and Pin-outs Intel® Workstation Board W2600CR TPS
6.2.2 Front Panel USB Connector
The server board includes a 10-pin connector, that when cabled, can provide up to two USB ports to a front panel. The following table provides the connector pin-out.
Table 34. Front Panel USB Connector Pin-out
Pin
1
3
5
7
9
Signal Name
P5V_USB_FP
USB2_P13_F_DN
USB2_P13_F_DP
GND
KEY
Pin
2
Signal Name
P5V_USB_FP
4
6
USB2_P11_F_DN
USB2_P11_F_DP
8 GND
10 NA
6.2.3 Local Control Panel Connector
The server board includes a 7-pin connector that is used when the system is configured with the
Intel Local Control Panel with LCD support. The following table provides the pin-out for this connector.
Table 35. Local Front Panel Connector Pin-out
Pin
1
3
5
7
Signal Name
SMB_SENSOR_3V3STBY_DATA
SMB_SENSOR_3V3STBY_CLK
FM_LCP_ENTER_N
FM_LCP_RIGHT_N
6.3 On Board Storage Connectors
Pin
2
4
6
Signal Name
GND
P3V3_AUX
FM_LCP_LEFT_N
The server board provides connectors for support of several storage device options. This section provides a functional overview and pin-out of each connector.
6.3.1 SATA Connectors: 6Gbps
The board includes two white single port SATA only connectors capable of transfer rates of up to 6Gb/s. The following table provides the pin-out for both connectors.
Table 36. SATA 6Gbps Connector Pin-out
Pin
1
2
3
4
5
6
7
Signal Name
GND
SATA_TX_P
SATA_TX_N
GND
SATA_RX_N
SATA_RX_P
GND
90 Intel order number G34153-003 Revision 1.2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 15 Introduction
- 15 Chapter Outline
- 15 Server Board Use Disclaimer
- 16 Product Overview
- 17 Product Feature Set
- 19 Main Board Connector and Component Layout
- 22 Main Board Rear I/O Layout
- 24 Server Board Mechanical Drawings
- 33 Functional Architecture
- 34 Processor Support
- 34 Processor Socket Assembly
- 35 Processor Population Rules
- 36 Processor Initialization Error Summary
- 39 Processor Functions Overview
- 40 QuickPath Interconnect
- 40 Integrated Memory Controller (IMC) and Memory Subsystem
- 46 Processor Integrated I/O Module (IIO)
- 48 C600-A Chipset Functional overview
- 48 Digital Media Interface (DMI)
- 48 PCI Express* Interface
- 48 Serial ATA (SATA) Controller
- 49 Serial Attached SCSI (SAS)/SATA (SCU) Controller
- 49 Rapid Storage Technology
- 50 PCI Interface
- 50 Low Pin Count (LPC) Interface
- 50 Serial Peripheral Interface (SPI)
- 50 Compatibility Modules (DMA Controller, Timer/Counters, Interrupt Controller)
- 50 Advanced Programmable Interrupt Controller (APIC)
- 50 Universal Serial Bus (USB) Controllers
- 50 Gigabit Ethernet Controller
- 51 Enhanced Power Management
- 51 Manageability
- 51 System Management Bus (SMBus* 2.0)
- 51 Integrated NVSRAM controller
- 52 Virtualization Technology for Directed I/O (Intel® VT-d)
- 52 JTAG Boundary-Scan
- 52 KVM/Serial Over Lan (SOL) Function
- 52 On-board SAS/SATA Support and Options
- 53 PCI Subsystem
- 54 Network Interface Controller
- 54 Network Interface
- 55 Workstation Board W2600CR2L)
- 56 SAS ROC Module Support
- 57 Workstation Board W2600CR Only)
- 60 Platform Management Overview
- 60 Server Management Function Architecture
- 60 Feature Support
- 62 Basic and Advanced Features
- 63 Integrated BMC Hardware: Emulex* Pilot III
- 65 Server Management Functional Specifications
- 65 BMC Internal Timestamp Clock
- 66 System Event Log (SEL)
- 66 Sensor Data Record (SDR) Repository
- 66 Field Replaceable Unit (FRU) Inventory Device
- 66 BMC Beep Codes
- 67 Diagnostic Interrupt (NMI) Button
- 67 BMC Watchdog
- 68 Sensor Monitoring
- 68 Overview
- 68 4600/2600/2400/1600/1400 Product Families
- 69 BMC System Management Health Monitoring
- 70 Processor Sensors
- 73 Thermal and Acoustic Management
- 74 Set Throttling Mode
- 74 Altitude
- 74 Set Fan Profile
- 74 Fan PWM Offset
- 74 Quiet Fan Idle Mode
- 75 Thermal Sensor Input for Fan Speed Control
- 76 Power Supply Status\Health Sensors
- 77 System Event Sensor
- 78 Platform Management Interface
- 79 Channel Management
- 79 User Model
- 79 LAN Interface
- 89 BMC Firmware Update
- 89 The BMC firmware release Number
- 89 Boot Recovery Mode
- 90 Force Firmware Update Jumper
- 90 Fast Firmware Update over USB
- 91 Advanced Management Feature Support
- 91 Enabling Advanced Management Features
- 91 Keyboard, Video, Mouse (KVM) Redirection
- 92 Media Redirection
- 94 Intelligent Power Node Manager (NM)
- 94 Overview
- 95 EU Lot 6 Mode
- 96 System Security
- 96 BIOS Password Protection
- 98 Trusted Platform Module (TPM) Support
- 98 TPM security BIOS
- 99 Physical Presence
- 99 TPM Security Setup Options
- 101 Trusted Execution Technology
- 102 Connector/Header Locations and Pin-outs
- 102 Power Connectors
- 102 Main Power Connector
- 102 CPU Power Connectors
- 102 Add-in Card Power Connectors
- 103 Front Panel Header and Connectors
- 103 Front Panel Header
- 104 Front Panel USB Connector
- 104 Local Control Panel Connector
- 104 On Board Storage Connectors
- 104 SATA Connectors: 6Gbps
- 105 Multiport Mini-SAS/SATA Connectors
- 106 RAID C600 Upgrade Key Connector
- 106 HSBP_I2C Header
- 106 HDD LED Header
- 106 Internal Type- A USB Connector
- 107 Internal eUSB SSD Header
- 107 Management and Security Connectors
- 107 RMM4_Lite Connector
- 107 RMM4_NIC Connector
- 108 TPM Connector
- 108 PMBus* Connector
- 108 Chassis Intrusion Header
- 108 IPMB Connector
- 108 FAN Connectors
- 109 System FAN Connectors
- 109 CPU FAN Connector
- 109 Serial Port and Video Connectors
- 109 Server Board S2600IP only)
- 110 Serial Port B Connector
- 110 Server Board S2600IP only)
- 111 Workstation Board W2600CR only)
- 112 Jumper Blocks
- 113 BIOS Default and Password Reset Usage Procedure
- 113 Set BIOS to default (Clearing the CMOS)
- 113 Clearing the Password
- 114 Force BMC Update Procedure
- 114 BIOS Recovery Jumper
- 115 ME Force Update Jumper
- 116 Light Guided Diagnostics
- 116 5-volt Stand-by LED
- 116 Fan Fault LED
- 116 CPU Fault LED
- 118 DIMM Fault LEDs
- 118 System ID LED, System Status LED and POST Code Diagnostic LEDs
- 119 System ID LED
- 120 System Status LED
- 121 POST Code Diagnostic LEDs
- 122 Design and Environmental Specifications
- 122 Products Design Specifications
- 125 Server Board Power Requirements
- 126 Processor Power Support
- 126 Output Power/Currents
- 126 Cross Loading
- 127 Standby Output
- 127 Voltage Regulation
- 127 Dynamic Loading
- 128 Capacitive Loading
- 128 Grounding