- Computers & electronics
- Computer components
- System components
- Server/workstation motherboards
- User manual
advertisement
Server Board S2600IP and Intel® Connector/Header Locations and Pin-outs
6.3.2 Multiport Mini-SAS/SATA Connectors
The board includes two 40-pin high density multiport mini-SAS/SATA connectors. On the board, these connectors are labeled as “SCU0 port(0-3)” supporting the chipset embedded SCU0 controller, and “SCU1 Port(4-7)”, supporting the embedded SCU1 controller. Both connectors can support up to four SATA or SAS ports each. By default, only the connector labeled “SCU0
Port(0-
3)” is enabled and has support for up to four SATA ports capable. The connector labeled
“SCU1 Port(4-7)” is only enabled when an optional 8-port SAS or SATA Intel ®
RAID C600
Upgrade Key is installed. The following tables provide the pin-out for each connector.
Table 37. Multiport SAS/SATA Connector Pin-out ("SCU_0 (0-3)")
Pin
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
Pin
A1
A2
A3
A4
A5
A6
A7
GROUND
SAS0_RX_C_DP
SAS0_RX_C_DN
GROUND
Signal name
A8
A9
A10
A11
A12
A13
A14
A15
SAS1_RX_C_DP
SAS1_RX_C_DN
GROUND
TP_SAS1_BACKPLANE_TYPE
GROUND
SGPIO_SAS1_DATAOUT
SGPIO_SAS1_DATAIN
A16
A17
A18
GROUND
SAS2_RX_C_DP
SAS2_RX_C_DN
GROUND
SAS3_RX_C_DP
SAS3_RX_C_DN
GROUND
MTH1 GROUND
MTH2 GROUND
MTH3 GROUND
MTH4 GROUND
Pin
B1
B2
B3
B4
B5
B6
B7
GROUND
SAS0_TX_C_DP
SAS0_TX_C_DN
GROUND
Signal name
SAS1_TX_C_DP
SAS1_TX_C_DN
GROUND
B8
B9
SGPIO_SAS1_CLOCK
SGPIO_SAS1_LOAD
B10 GROUND
B11 PD_SAS1_CONTROLLER_TYPE
B12 GROUND
B13 SAS2_TX_C_DP
B14 SAS2_TX_C_DN
B15 GROUND
B16 SAS3_TX_C_DP
B17 SAS3_TX_C_DN
B18 GROUND
MTH5 GROUND
MTH6 GROUND
MTH7 GROUND
MTH8 GROUND
Table 38. Multiport SAS/SATA Connector Pin-out ("SCU_1 (4-7)")
Signal name
GROUND
SAS4_RX_C_DP
SAS4_RX_C_DN
GROUND
SAS5_RX_C_DP
SAS5_RX_C_DN
GROUND
TP_SAS2_BACKPLANE_TYPE
GROUND
SGPIO_SAS2_DATAOUT
SGPIO_SAS2_DATAIN
GROUND
SAS6_RX_C_DP
Pin
B1
B2
B3
B4
Signal name
GROUND
SAS4_TX_C_DP
SAS4_TX_C_DN
GROUND
B5
B6
B7
B8
SAS5_TX_C_DP
SAS5_TX_C_DN
GROUND
SGPIO_SAS2_CLOCK
B9 SGPIO_SAS2_LOAD
B10 GROUND
B11 PD_SAS2_CONTROLLER_TYPE
B12 GROUND
B13 SAS6_TX_C_DP
Revision 1.2 Intel order number G34153-003 91
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 15 Introduction
- 15 Chapter Outline
- 15 Server Board Use Disclaimer
- 16 Product Overview
- 17 Product Feature Set
- 19 Main Board Connector and Component Layout
- 22 Main Board Rear I/O Layout
- 24 Server Board Mechanical Drawings
- 33 Functional Architecture
- 34 Processor Support
- 34 Processor Socket Assembly
- 35 Processor Population Rules
- 36 Processor Initialization Error Summary
- 39 Processor Functions Overview
- 40 QuickPath Interconnect
- 40 Integrated Memory Controller (IMC) and Memory Subsystem
- 46 Processor Integrated I/O Module (IIO)
- 48 C600-A Chipset Functional overview
- 48 Digital Media Interface (DMI)
- 48 PCI Express* Interface
- 48 Serial ATA (SATA) Controller
- 49 Serial Attached SCSI (SAS)/SATA (SCU) Controller
- 49 Rapid Storage Technology
- 50 PCI Interface
- 50 Low Pin Count (LPC) Interface
- 50 Serial Peripheral Interface (SPI)
- 50 Compatibility Modules (DMA Controller, Timer/Counters, Interrupt Controller)
- 50 Advanced Programmable Interrupt Controller (APIC)
- 50 Universal Serial Bus (USB) Controllers
- 50 Gigabit Ethernet Controller
- 51 Enhanced Power Management
- 51 Manageability
- 51 System Management Bus (SMBus* 2.0)
- 51 Integrated NVSRAM controller
- 52 Virtualization Technology for Directed I/O (Intel® VT-d)
- 52 JTAG Boundary-Scan
- 52 KVM/Serial Over Lan (SOL) Function
- 52 On-board SAS/SATA Support and Options
- 53 PCI Subsystem
- 54 Network Interface Controller
- 54 Network Interface
- 55 Workstation Board W2600CR2L)
- 56 SAS ROC Module Support
- 57 Workstation Board W2600CR Only)
- 60 Platform Management Overview
- 60 Server Management Function Architecture
- 60 Feature Support
- 62 Basic and Advanced Features
- 63 Integrated BMC Hardware: Emulex* Pilot III
- 65 Server Management Functional Specifications
- 65 BMC Internal Timestamp Clock
- 66 System Event Log (SEL)
- 66 Sensor Data Record (SDR) Repository
- 66 Field Replaceable Unit (FRU) Inventory Device
- 66 BMC Beep Codes
- 67 Diagnostic Interrupt (NMI) Button
- 67 BMC Watchdog
- 68 Sensor Monitoring
- 68 Overview
- 68 4600/2600/2400/1600/1400 Product Families
- 69 BMC System Management Health Monitoring
- 70 Processor Sensors
- 73 Thermal and Acoustic Management
- 74 Set Throttling Mode
- 74 Altitude
- 74 Set Fan Profile
- 74 Fan PWM Offset
- 74 Quiet Fan Idle Mode
- 75 Thermal Sensor Input for Fan Speed Control
- 76 Power Supply Status\Health Sensors
- 77 System Event Sensor
- 78 Platform Management Interface
- 79 Channel Management
- 79 User Model
- 79 LAN Interface
- 89 BMC Firmware Update
- 89 The BMC firmware release Number
- 89 Boot Recovery Mode
- 90 Force Firmware Update Jumper
- 90 Fast Firmware Update over USB
- 91 Advanced Management Feature Support
- 91 Enabling Advanced Management Features
- 91 Keyboard, Video, Mouse (KVM) Redirection
- 92 Media Redirection
- 94 Intelligent Power Node Manager (NM)
- 94 Overview
- 95 EU Lot 6 Mode
- 96 System Security
- 96 BIOS Password Protection
- 98 Trusted Platform Module (TPM) Support
- 98 TPM security BIOS
- 99 Physical Presence
- 99 TPM Security Setup Options
- 101 Trusted Execution Technology
- 102 Connector/Header Locations and Pin-outs
- 102 Power Connectors
- 102 Main Power Connector
- 102 CPU Power Connectors
- 102 Add-in Card Power Connectors
- 103 Front Panel Header and Connectors
- 103 Front Panel Header
- 104 Front Panel USB Connector
- 104 Local Control Panel Connector
- 104 On Board Storage Connectors
- 104 SATA Connectors: 6Gbps
- 105 Multiport Mini-SAS/SATA Connectors
- 106 RAID C600 Upgrade Key Connector
- 106 HSBP_I2C Header
- 106 HDD LED Header
- 106 Internal Type- A USB Connector
- 107 Internal eUSB SSD Header
- 107 Management and Security Connectors
- 107 RMM4_Lite Connector
- 107 RMM4_NIC Connector
- 108 TPM Connector
- 108 PMBus* Connector
- 108 Chassis Intrusion Header
- 108 IPMB Connector
- 108 FAN Connectors
- 109 System FAN Connectors
- 109 CPU FAN Connector
- 109 Serial Port and Video Connectors
- 109 Server Board S2600IP only)
- 110 Serial Port B Connector
- 110 Server Board S2600IP only)
- 111 Workstation Board W2600CR only)
- 112 Jumper Blocks
- 113 BIOS Default and Password Reset Usage Procedure
- 113 Set BIOS to default (Clearing the CMOS)
- 113 Clearing the Password
- 114 Force BMC Update Procedure
- 114 BIOS Recovery Jumper
- 115 ME Force Update Jumper
- 116 Light Guided Diagnostics
- 116 5-volt Stand-by LED
- 116 Fan Fault LED
- 116 CPU Fault LED
- 118 DIMM Fault LEDs
- 118 System ID LED, System Status LED and POST Code Diagnostic LEDs
- 119 System ID LED
- 120 System Status LED
- 121 POST Code Diagnostic LEDs
- 122 Design and Environmental Specifications
- 122 Products Design Specifications
- 125 Server Board Power Requirements
- 126 Processor Power Support
- 126 Output Power/Currents
- 126 Cross Loading
- 127 Standby Output
- 127 Voltage Regulation
- 127 Dynamic Loading
- 128 Capacitive Loading
- 128 Grounding