Intellex® Digital Video Management System

34 Intellex ® Operating Instructions

Playback

Controls and Indicators

4.

Image Database —

This progress bar indicates how much recording space in the image database has been used and how much is available.

5.

Record —

This indicator is lit when the unit is recording images. On the front panel, this indicator is labeled REC.

6.

Play —

This indicator is lit when the unit is playing back images. Play changes to Pause when playback is paused.

When playing back images restored from an archive tape, the unit displays Play (Archive) or Pause (Archive).

7.

Playback Overlay —

Displays the name of the displayed camera, the image date and time and the alarm input or type of alarm event (if any).

Use the mouse pointer and the following on-screen controls to play back images:

8.

1–16 (Cameras) —

Click to play back images for specific cameras. The light indicates which camera is being played back. The message No Video appears on the screen if no images have been recorded for the selected camera.

9.

Alarms Indicator —

This light indicates that alarm events have occurred, but have not been reviewed. It also blinks if a notification screen appears.

10. Play/Pause

knob — Controls the playback speed and direction (see Using the Playback Screen). The unit displays the playback speed (1x to 5x) and direction (forward or reverse).

11. Alarms —

Click to display the alarm review screen.

Chapter 3 — Playback Operation 35

12. Play/Pause

button — Click to play back images or to pause image playback.

13. Screen Formats —

Click to change the live display format. If in playback mode, the unit changes the live display format, but does not exit playback. If an optional live monitor is installed, the new format appears immediately.

14. Status —

Click to display the status screen (see Review-

ing Unit Status).

15. Seq (Sequence) —

Click to display cameras sequentially

(see Camera Sequencing). If in playback mode, the unit changes the format on the live display, but does not exit playback. If an optional live monitor is installed, camera sequencing appears immediately.

16. Full Scrn —

Click to hide the playback controls and indicators and to display the image area full-screen. Click the screen to display the playback controls and indicators again and to display the image area at its normal size (see

Full-Screen Operation).

17. Search —

Click to search the image database for specific images (see Image Database Search).

18. Close —

Click to close this screen and return to the main screen.

19. Tools —

Click to enhance the currently displayed image using the image enhancement tools (see Image Enhancement

Tools). You can also print the image or save it to a diskette.

20. GoTo —

Click to select any starting point in a video segment by moving the slider control. The Begin Date and

End Date and Begin Time and End Time of the selected segment is displayed in the GoTo screen. As you move the slider, the Select Date and Time at the slider’s location in the segment is displayed in the GoTo screen. Move the slider to any desired point in the segment, then click Play to begin or resume playback of the segment at that point.

21. Help —

Click to display help information.