Manual Fuel POS - eMIS - English

3.3.3.1.4 Tab ‘Print’ (Specific outdoor terminal)

In the tab ‘Print’ we will find the following information:

• Paper cut

At the installation of the outdoor terminal, it is defined whether the receipt is cut completely or partially at the end of the day. This setting depends on the type of printer unit in the terminal. If the receipt is collected in a small box, it can be cut completely. However when the receipt can fall on the ground, it will only be cut partially.

• Min. Lines

To avoid a receipt being too short so that a customer cannot grip it, a minimum number of lines is programmed at the installation to obtain a minimum length of the receipt. If necessary, blank lines are added to the receipt to obtain this minimum length.

• INFO Receipt

This parameter is defined at the installation and it defines whether a receipt with general system information is available at the outdoor terminal.

February 16, 2009/V24

3-189

• Logo

With this option, the manager can decide whether the logo of the company has to be printed on each receipt.

February 16, 2009/V24