Manual Fuel POS - eMIS - English

3.7.5.2 Tab ‘Outdoor’

On the tab ‘Outdoor’ we will find the following information:

• Default customer language

This is the language that will be used by default on the screen of the outdoor terminal. The customer can however change himself the language.

• Default ticket language

This is the language used on the receipts. It can be set up in 3 different ways by the service engineer:

* The language set up as the one of the Fuel POS system is always used as language on the receipt.

* The language set up as the default customer language is always used as language on the receipt.

* The language used in the dialogue with the customer is used automatically as language on the receipt.

• Language button

This is the language button which is displayed on the screen of the outdoor terminal. The customer has to press this button if he wants to change the language of the teminal.

© 1993-2009 Tokheim

February 16, 2009/V24

3-315

• Language order

When the customer presses the language button on the outdoor terminal, then a list with the available languages will displayed. The order of the languages will be as listed here. Select the language you want to move in order to change this order. Use next one of the two buttons on the right side:

Press this button to move the selected language upwards.

Press this button to move the selected language downwards.

• Restore defaults

The technician can restore the default values for the selected country and the language, which was chosen at the installation.

3-316 © 1993-2009 Tokheim

February 16, 2009/V24

3.7.6 Date and time (7,6)

The function to program the date and the time of the Fuel POS can only be used if no credit cards are accepted via the Fuel POS. If credit cards are accepted, then the Petrol

Server will automatically modify the date and the time. In this way, for example the switch from wintertime to summertime will occur automatically. When no credit cards are accepted, then for example the switch from wintertime to summertime must be done manually.

After having chosen this menu item, a pop-up window will be shown with the current date and time:

© 1993-2009 Tokheim

February 16, 2009/V24

3-317