advertisement
Using Speed Access
If a function has a speed access number, type in the number at the menu display prompt to access the function.
Speed access numbers must be entered in two-digit format
(for example, 00 or 99).
A list of speed access numbers follows this section.
Here is an example of using speed access.
To access the
Redial Tries function, you only need to press three keys.
From the standby mode with no document loaded:
1 Press Menu/Exit.
2 Press 4 key.
3 Press 0 key.
4
Redial Tries function appears.
5 Enter the setting you want.
Speed Access Numbers
There are seven types of speed access numbers.
Clock Adjustment
ID/Password Programming
Machine Settings
Dial Options
Incoming Options
Report Options
LAN Options
The speed access numbers and their assigned functions are listed in the following sections.
44
|
OKIFAX 5950 Dual Line
Speed Access Numbers (by Type)
Clock Adjustment
00 Clock Adjustment
ID/Password Programming
01 TSI/CSI
02 Sender ID
03 Personal Box
04 Memory Password
Machine Settings
10 Auto Answer Mode
11 Monitor Volume
12 Buzzer Volume
13 User Language
14 Remote Diagnosis
15 TX Mode Default
16 No Toner Memory Receive
17 Memory Full Save
18 Instant Dial
19 Restrict Access
20 ECM Function
21 Closed Network
22 Toner Save
23 Sender ID Switch
24 1st Paper Size
25 2nd Paper Size
This is active only when the second paper tray is installed.
User’s Guide: English
|
45
Speed Access Numbers (by Type)
Dial Options
40 Redial Tries
41 Redial Interval
42 Auto Start
43 Dial Tone Detect
44 Busy Tone Detect
45 MF/DP
46 Pulse Dial Rate *
47 Pulse Make Ratio *
48 Pulse Dial Type *
49 MF Tone Duration *
50 PBX Line
51 Flash/Earth/Normal *
52 Dial Prefix
* Settings for 46, 47, 48, 49, and 51 should only be changed by Authorized Service Technicians.
Incoming Options
60 Incoming Ring
61 Remote Receive
62 T/F Timer Program
63 Continuous Tone
64 PC/FAX Switch
65 CNG Count
66 Ring Response
67 Distinctive Ring
Report Options
70 MCF (Single Loc.)
71 MCF (Multiple Loc.)
72 Message in MCF
73 Error Report (MCF)
46
|
OKIFAX 5950 Dual Line
!
Speed Access Numbers (by Type)
LAN Options
Functions 80 to 85 are reserved for future options.
User’s Guide: English
|
47
advertisement
Key Features
- Dual line capability for sending and receiving faxes on two separate lines
- Large, easy-to-read display for clear viewing of fax transmissions
- Built-in speakerphone for hands-free communication
- One-touch dialing for quick and easy access to frequently called numbers
- Automatic redial for convenience when fax lines are busy
- Error correction mode for reliable fax transmissions
- Confidential receive mode for added security
- Caller ID display for identifying incoming callers
- Distinctive ring detection for differentiating between voice and fax calls
- Fax forwarding capability for sending faxes to multiple destinations
Related manuals
Frequently Answers and Questions
How do I set the date and time on the OKI OF5950DL?
How do I send a fax using the OKI OF5950DL?
How do I receive a fax using the OKI OF5950DL?
How do I change the toner cartridge in the OKI OF5950DL?
How do I clean the OKI OF5950DL?
advertisement