- Computers & electronics
- Audio & home theatre
- Video switches
- Network Technologies
- VEEMUX SM-nXm-DVIA-LCD
- Installation and Operation Manual
Features and Functions. Network Technologies VEEMUX SM-nXm-DVIA-LCD, SS 4x4 Stereo Audio Matrix Switcher INC, VEEMUX SM-nXm-DVI-LCD
Add to my manuals
61 Pages
advertisement
NTI VEEMUX DVI VIDEO MATRIX SWITCH
FEATURES AND FUNCTIONS
IR
System
Reset
1 2 3 4
AC INPUT 100-240VAC,30W OUTPUT 8
INPUT 8
FUSE T2A,250V
OUTPUT 7
INPUT 7
5
FRONT VIEW OF SM-8X8-DVI-LCD
OUT: 1 2 3 4
IN: 1 2 3 4
Menu
6
1
5
2 3
6
Out
7
7
REAR VIEW OF SM-8X8-DVI-LCD
OUTPUT 6
INPUT 6
OUTPUT 5
INPUT 5
OUTPUT 4
INPUT 4
4
8
OUTPUT 3
INPUT 3
1
5
OUTPUT 2
INPUT 2
2 3
6
In
7
8
4
8
OUTPUT 1
INPUT 1
NTI
R
Network Technologies Inc
VEEMUX R
12
RS232
(DCE) ETHERNET
R J45
"< US B > "
>" SB "<U
RJ45
9 10
1. IR LED - for indicating when an infrared signal is being received from the IR remote control
2. IR Receiver- this receives the IR signal from the infrared remote control (optional)
11 13 14
3. Power/Standby- this LED indicates when the VEEMUX is either ready for user interface (green) or in standby mode
(red)
4. System Reset- press this button to cycle the VEEMUX processor and reboot the system
5. LCD Display - for indicating what inputs (video sources) are connected to the labeled output (display device)
6. Menu buttons - used to control LCD menu navigation
7. Out buttons used to select which outputs (display devices) to connect to which inputs (video sources) when pressed
8. In buttons used to select which inputs (video sources) to connect to which outputs (display devices) when pressed
9. IEC Connector- for connection of AC power cord
10. Power Switch - for turning the VEEMUX ON or OFF
11.
Input - DVI-I Female connector- for connecting to DVI/HDMI video sources
12. Output - DVI-I Female connector- for connecting to DVI/HDMI display devices
13. RS232 connector - RJ45 female- for connecting the user's RS232 control cable
14. ETHERNET - RJ45 female connector- for connection of CAT5 cable to Local Area Network (LAN) for WEB interface
3
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 Introduction
- 6 Supported Web Browsers
- 7 Materials
- 8 Features and Functions
- 9 Installation
- 9 To Mount to a Rack
- 10 Make All Connections
- 13 Audio Connections
- 14 Operating the VEEMUX
- 14 Front Panel LCD with Keypad Control
- 15 LCD Menus
- 17 Save and Load (Recall) Config
- 18 USB Console Port
- 18 Installing Drivers
- 18 Windows XP-32 bit Installation
- 20 Windows 7-64 bit Installation
- 22 Using the USB Console Port
- 23 RS232 Control
- 23 Remote Connection
- 23 Baud Rate
- 23 Unit Address and Loop Back
- 25 Command Protocol
- 26 Autostatus
- 26 Matrix Switcher’s Control Program For Windows 9X, NT, 2000, XP, Vista and
- 27 SerTest- RS232 Interface Test Program
- 27 Main Options
- 27 Matrix Operations
- 27 Ethernet Operations
- 28 Setup Options
- 29 Ethernet Control
- 29 Telnet Interface-Port
- 31 Command Summary
- 32 Command Detail
- 32 Read Unit Size
- 32 Read Connection for Output Port
- 32 Connect Output Port to Input Port
- 32 Connect All Output Ports to Input Port
- 33 Enable Auto Status Mode
- 33 Disable Auto Status Mode
- 33 Examine connections
- 34 AO-Read Audio Connection for Output Port
- 34 AS-Connect Audio Output Port to Input Port
- 34 AA-Connect All Audio Outputs to Input Port
- 35 AV- Set Audio Volume for Output Port
- 35 AM- Mute/Unmute Audio Output Port
- 35 Terminate telnet session
- 36 Web Interface
- 36 Enter the Password
- 37 Main Menu
- 38 Video Switch Page
- 39 Administration
- 39 System Configuration
- 40 Network Configuration
- 41 Video Input Names
- 42 Video Output Names
- 43 Scanning Sequences
- 45 User Config