- Industrial & lab equipment
- Electrical equipment & supplies
- Batteries & accessories
- Battery chargers
- AWG
- DUAL USB POWER CHARGER FOR NDS LITE
- Installation manual
advertisement
AXYS ® Intellivox 808/1608 Installation Manual Rev 1.1
5. APPENDIX
oPTIoNAl ACCESSorIES
Listed below are a number of additional components which may be required for an individual installation.
Mating connectors and components for external wiring:
CONNECTOR
Mains power
Audio Input
Network
Failure relay or Ext SPL Mic/Temp.
Strain relief housing for 5-pole connectors
Strain relief housing for 6-pole connectors
DESCRIPTION
PowerCon ® plug
WAGO 6-pin female
WAGO 5-pin female
WAGO 5-pin male
Ivx-DC/DS808 loudspeaker cable with 20 p male/female Harting connectors, 5 m
Ivx-DC/DS1608 loudspeaker cable with 40 p male/female Harting connectors, 5 m
WAGO wire inserts (white) for wire dias. 0.08 to 0.2 mm
WAGO wire inserts (light grey) for wire dias. 0.25 to 0.5 mm
WAGO wire inserts (dark grey) for wire dias. 0.75 to 1 mm
WAGO wire insertion tool other installation-related accessories:
DESCRIPTION
Intellivox hinge bracket 90°
Input PCB assy. with 1 x 70/100 V and 1 x 0 dBV line input
Input PCB assy. with dual 70/100 V inputs
External ambient mic/temperature sensor
ORDER CODE
802010 (2 required)
381001
381003
97661101
ORDER CODE
17824103
17954106
17954105
17944105
17949195
17949196
97920003
97870003
17949605
17949615
17949625
17949901
Network Accessories
DESCRIPTION
Serial interface converter, RS-232 to RS-485
Serial interface converter, USB to RS-485
Program Set (inc. WinControl CD, RS-232 interface, cable)
Program Set (inc. WinControl CD, USB interface, cable)
9-pin female Dsub connector
Cover for D9 connector
Adaptor cable, 9-pin male Dsub to WAGO 231, 5 m, to be used with RS-232 interface
Adaptor cable, 9-pin male Dsub to 5-pin XLR male, 5 m, to be used with RS-232 interface
Adaptor cable, 5-pin XLR female to 5-pin XLR male, 20 m, to be used with USB interface
Adaptor cable, 5-pin XLR female to WAGO 321, 5 m, to be used with USB interface
ORDER CODE
387801
387802
386601
386602
17223309
17219109
97660081
97660082
79660084
97660080
201112/IvxHPIM_v1.1
22
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Reference to Statements of Conformity
- 2 User’s Notice and disclaimer
- 4 1. Important Safety Instructions
- 5 2. Introduction
- 5 Applicable models and variants
- 6 What’s in the packaging
- 7 3. Installation Guide
- 7 Preparing for Installation
- 7 Signal and Control cables
- 8 Mechanical Installation of the Amplifier
- 9 Connector and wiring details
- 9 AC Mains
- 10 WAGO connectors
- 11 Audio inputs
- 12 Network connection
- 13 Fault monitoring relay connector
- 14 External Ambient SPL/Temperature Sensor
- 15 Loudspeaker connections
- 15 Cable Specifications
- 16 Mechanical Installation of the Loudspeaker
- 18 - Mounting Procedure
- 19 4. System checks
- 19 Connecting the PC to the IntelliAmp
- 20 Settings file upload
- 22 5. Appendix
- 22 Optional accessories
- 23 Common analogue grounding issues
- 23 Software and firmware updates
- 23 Network cables