4.3 Selecting and Controlling a Camera. Huawei VP9050

Add to my manuals
124 Pages

HUAWEI VP9050 Executive Video Terminal

User Guide

Parameter

Stretch mode

Display local video

Display remote video

Display H.239

4 Video Settings

Description

This specifies whether to adjust a video to fit the video into the screen.



Stretch: The aspect ratio can be changed.



No stretch: The aspect ratio remains unchanged.



Intelligent stretch: The system cuts the video to a proper size, and then stretches the video to full-screen mode after locking the aspect ratio. For example, to change a wide-screen video to a narrow-screen video, the system cuts the left and right sections of the wide-screen video, and then stretches the video to full-screen mode.

This specifies the content displayed on the interface. You can choose between local video, remote video, local presentation, and remote presentation.

Table 4-8 Common settings parameter

Parameter

GUI

Description

During a conference, you can display the video on one display and the user interface on another display by setting GUI to the output interface that has been connected to the display dedicated for displaying the user interface. In this case, the user interface will not cover the conference video. By default, the LCD interface is selected.

Step 4 Save the settings.

----End

4.3 Selecting and Controlling a Camera

4.3.1 Selecting a Camera

To control a camera, first select the camera.

If the terminal is not in a conference, only the local camera can be controlled. If the terminal is in a conference, both the local and remote cameras can be controlled.

To select a camera to be controlled, do the following:

Step 1 Press twice consecutively, and then select Select camera.

Step 2 Select the camera to be controlled from remote cameras and the camera connected to the terminal.

The text on the upper left corner indicates the camera (local or remote) that is currently being controlled.

Issue 03 (2011-12-10) Huawei Proprietary and Confidential