advertisement
HUAWEI VP9050 Executive Video Terminal
User Guide
Remote Video Source
During a conference, you can select to view a remote video source.
To select a remote video source, press on the remote control, and then select a camera.
Each remote video source is identified by a camera icon. In certain cases, however, the device connected to the remote terminal is not a camera.
8.6 Hiding the Local Video
During a conference, you can hide the local video if you do not want the video to be seen by remote sites. After this function is enabled, the local site is displayed as a blue screen at remote sites.
To hide the local video, choose Utilities > Hide Video (Off), and then, if prompted, confirm that you want to enable the function to hide the local video.
After the function to hide the local video is enabled, appears in the lower right corner of a screen in full-screen mode. In addition, appears on the home screen, indicating that the local microphone is muted.
Issue 03 (2011-12-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
66
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project