Recording from external equipment. Samsung DVD-R120

3_00685A_R120_Eng(30~40) 3/4/05 2:18 PM Page 34

Recording from external equipment

Before you start

Check that the disc has enough available space for the recording. Adjust the recording mode.

1 Press the OPEN/CLOSE button, and place a recordable disc on the disc tray.

2 Press the OPEN/CLOSE button to close the disc tray.

Wait until “LOAD” disappears from the front panel display.

If an unused DVD-RAM disc is used, whether to format or not will be asked first. (See page 31)

If an unused DVD-RW disc is used, whether to initialize or not will be asked first. (See page 31)

3 Press the INPUT button to select the input source according to the connection you made.

The front panel display changes in the following sequence:

➞ Channel Number ➞ L1 ➞ L2 ➞ DV

5 Press the REC button.

To stop recording

Press the STOP ( ) button to stop or finish a recording in progress.

●

When using DVD-RAM/DVD-RW/DVD-R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed

NOTE

■ You can not change the recording mode and input source while recording.

■ Recording will stop automatically if there is no free space left for recording.

■ Up to 99 titles can be recorded onto a disc.

■ Recording will stop automatically if a copy protected image is selected.

■ DVD-RAM/DVD-RW discs must be formatted before starting to record. Most new discs are sold unformatted.

■ Do not use DVD-R authoring discs with this unit.

If you connect a digital camcorder, press the

INPUT button to select DV. (See page 35)

4 Press the REC MODE button repeatedly, (or press the REC MODE button and then press

the …† button) to select the recording speed(quality).

➞ SP ➞ LP ➞ EP ➞ XP

Record Mode SP (02:12)

34

- English