Bit Settings. Remote Automation Solutions Alarm Condition

Reference Guide

D301469X412

23-Mar-2010 - Page 26

Alarm Condition Configuration

4.12.1 Bit Settings

The bit settings available are: -

• Bit 0 - (value when set = 1) - Questionable in the device

• Bit 1 - (value when set = 2) - Data Collection Failure

• Bit 2 - (value when set = 4) - Device Offline

• Bit 3 - (value when set = 8) - Not a Number

4.12.2 Questionable in Device

When this box is checked, if the questionable value of the signal indicates that the value of the signal is questionable in the device, a NW3000 questionable alarm will be raised against the signal.

Remote Automation Solutions

Website: www.EmersonProcess.com/Remote