advertisement
CORDLESS IMPACT DRIVER
PDSSA 20-Li A1
Introduction
Congratulations on the purchase of your new appliance . You have chosen a high-quality product . The operating instructions are part of this product . They contain important information about safety, usage and disposal . Before using the product, please familiarise yourself with all operating and safety instructions . Use the product only as described and for the range of applications specified . Please also pass these operating instructions on to any future owner .
Intended use
This appliance is intended for screwing in and unscrewing screws as well as for tightening and loosening nuts . The appliance has clockwise/ anticlockwise rotation, a 1/4” hexagon socket bit holder and an LED working light . The light on this appliance is intended to illuminate the immediate work area of the appliance . The rotary impact function of the appliance enables the power of the motor to be converted into uniform rotary impacts .
The impact mechanism comes into effect during tightening and loosening .
The appliance is designed for use by adults . Young people under 16 years of age may only use the appliance under supervision . The manufacturer accepts no liability for damages caused by improper use or incorrect operation of the appliance .
Use this product only as described and for the areas of applications specified . The appliance is not intended for commercial use . Any other usage or modification of the appliance is deemed to be improper and carries a significant risk of accidents .
The manufacturer accepts no responsibility for damage(s) attributable to misuse .
Features
Tool holder
Locking sleeve
Bit holder (magnetic)
Rotation direction switch/lock
Belt clip
Battery charge level button
Battery display LED
Battery pack
Release button for battery pack
LED work light
ON/OFF switch / Speed control
Adapter to 1/4” square
Bit holder
High-speed charger
Red charge control LED
Green charge control LED
Package contents
1 cordless impact driver PDSSA 20-Li A1
1 high-speed battery charger PLG 20 A1
1 battery pack PAP 20 A1
1 adapter from hex (1/4”) to square
1 1/4” extension (50 mm)
1 belt clip
1 carrying case
1 set of operating instructions
Technical data
Cordless impact driver:
PDSSA 20-Li A1
Rated voltage:
Idle speed:
Rated stroke rate:
Max . torque:
Suitable for metal screws:
Suitable for wood screws:
Tool holder:
20 V (DC)
0–2800 rpm
0–3600 ipm
180 Nm
≤ M8
≤ 8 mm Ø
1/4”
Use only the following battery to operate the cordless tool: PAP 20 A1
Type:
Rated voltage:
LITHIUM ION
20 V (DC)
Capacity: 2 Ah
Cells: 5
■
14
│
GB │ IE PDSSA 20-Li A1
advertisement
Related manuals
advertisement