PARAMETRES PROGRAMMING. Alpha Tech IP Bold - VoIP DoorPhone

Add to My manuals
86 Pages

advertisement

PARAMETRES PROGRAMMING. Alpha Tech IP Bold - VoIP DoorPhone | Manualzz

3 Parametres programming

Parametres programming is performed by ordinary WEB browser.

(Caution! version of IE V7 and lower are not supported).

3.1 WEB interface access

For successful display of WEB interface of IP BOLD door entry we go through some details.

Field length - names, titles, codes, passwords have fix length 40 characters .

- URL and etc. have max length 255 characters

3.1.1 What you should know

In doorphone IP BOLD is a double DIP switch. Individual switches should be in the positions shown.

1 – on

2 – off

Meaning of each switches:

1. Always position on , this switch is only used in the manufacture or repair service.

2. If the position on at power (or reset) so in doorphone is set the default

IP address 192.168.1.250 and uses the default style. The name is admin and the password is 1234 . To see the video is the name video and password 1234 (if required). The operating position is off .

Warning:

If you get into a situation that you do not know the IP address set in IP BOLD or have forgotten your password, so there is reason to use the DIP2 switch, switch it to the ON position and restart IP BOLD. Then you change the settings eg. Passwords or network settings. Remember to switch DIP2 into operating position DIP2 = off and click save and restart. After rebooting, IP

BOLD is now all set according to the changes.

You should also dedicate attention into which PC network you are connected. Default door entry IP address is 192.168.1.250.

When is your PC in network setup also on segment 192.168.1.xxx then might caused a problem in network just by same IP address etc. 192.168.1.250.

In this case we recommend temporarily disconnect device from network.

When your PC is setup to different network segment than 192.168.1.xxx two possibilities are available:

1. In PC you have system Windows 7 or 8, then you can setup „network setting “ – „Protocol IP version 4“ – „Property“ – specify“ and here add IP address in PC segment of door entry for example. 192.168.1.10

IP BOLD - installation and operating instructions 33

advertisement

Related manuals