advertisement
4 Technical parameters
4.1 Electrical parameters
Parametr Value conditions
Interface
VoIP protocol
Default IP address
Audio
Band range
Echo supression
Output power
Video
Ethernet 10BaseT, 100BaseTx
SIP 2.0 defined RFC3261
192.168.1.250
G.711u, G.711a, G.726-32b, GSM, G722,
G729 (optional)
300Hz – 3400 Hz automatical
Class D, 1W/8ohm, 94dB/1kHz/1m/1% série JPEG, MJPG, stream H.263, H.264
Resolution
Camera angle
Power supply - adapter
- or PoE
Max. consumption
Max. 640 x 480
80deg H x 80deg. V
12V
DC
± 2V , 12V
AC
± 1V
IEEE802.3af Altern. A + B
300mA
Max. switching voltage by relays 48V
12Vss when I < 1A when U < 30 V Max. switching current by relays 2A
Temperature range - 20 to + 80°C
4.2 Mechanical dimensions
IP BOLD model dimensions HxWxD [mm]
IP BOLD Tx
IP BOLD TxC
IP BOLD TKx
IP BOLD TKxC
BOLD Shield S
BOLD Shield B
BOLD Shield K
205 x 135 x 20
205 x 135 x 20
280 x 135 x 20
280 x 135 x 20
90 x 140 x 54
208 x 140 x 61
283 x 140 x 61
Water proof and antivandal resistence of all models is IP44
80 IP BOLD - installation and operating instructions
4.3 Video parameters
Video formats: JPG, MJPG, H.263, H.264
Video for WEB:
I nternet Explorer, Mozilla, Opera, Firefox… - (set of JPG pictures - Port 80) it is used repeated http request „IPaddress/video.jpg“ programm PopUp (iBell office) - (MJPEG stream - Port 80) is used http request „IPaddress/video.mjpg“ (sometimes is reload necessary to run).This video is more fluent and has less network strain.
Stream video for IP phones:
H.263 and H264 is established by IP BOLD door entry and IPvideo phone over
SIP/SDP protocol on standard SIP port. The video (as same as sound) then runs by RTP protokol on ports agreed over SIP (usually 9078).
rtsp request „rtsp://IPaddress/video.264“ or rtsp request „rtsp://IPaddress/video.263“
Video parametres:
JPG Pictures are created in IP modul and for all transmit protocols are the same .The Size (resolution) of video is selected in "Video setting" on WEB.
Maximal resolution is defined by USB camera type and mostly is 640x480
Stream H.263 knows CIF resolution (352x288). It means bigger JPEG is cut and smaller framed.
Frequency (1-15 picture./sec) JPG Picture is selected in "Video setting" on
WEB as Low – Optimal - Full.
Frequency MJPG and Stream H.263 coming from camera. It is used every second and reset is between 7-15 pictures/sec. Higher resolution brings decreasement of Pictures/ sec. (limited by processor efficiency)
Ports:
Port 80 for http (WEB pages even JPG / MJPG video on them)
Port 5060 for SIP
Ports RTP with oposite party communicates over SIP. Usually Port 7078 suggested for audio and Port 9078 for video
Port 554 video( H264 and H263) provided by door entry (server) protocol RTSP
Audio files: WAV – 8Kbit – mono – 16bit PCM
Setup: Default IP adress 192.168.1.250 name: admin / password: 1234
Video: name: video / password: 1234 (if required).
IPDP - installation and operating instructions 81
advertisement
Related manuals
advertisement
Table of contents
- 6 BASIC DESCRIPTION
- 12 IP BOLD basic board
- 15 Relays connection
- 19 Usage of door contacts
- 21 Wall mounting installation
- 22 Montage dimension (model without keyboard)
- 23 Montage dimension (model with keyboard)
- 24 Montage dimension with Roof (model without keyboard)
- 25 Montage dimension with Roof (model with keyboard)
- 26 Open and close of cover
- 27 Name cards changing
- 28 Micro SD card
- 28 Button numbering
- 29 SERVICE OF IP BOLD
- 29 Button press – outgoing call
- 30 Button press – code lock
- 30 Keypad usage
- 31 Outgoing call
- 31 Incoming call
- 33 PARAMETRES PROGRAMMING
- 33 What you should know
- 34 Login
- 36 Language settings
- 37 IP Network setting
- 39 SIP account
- 41 SIP parameters
- 43 WEB server
- 45 Phone book
- 48 Relays
- 55 Door sensors
- 56 Setting SNMP
- 57 Time profiles
- 58 Date and time setting
- 59 E-mail
- 61 DoorPhone
- 64 Audio setting
- 65 Audio codecs
- 66 Video setting
- 67 Video watching (PopUp programm)
- 68 Video codecs
- 69 Streaming
- 71 Restart
- 72 Configuration
- 73 Language and style
- 74 Style and language preparation
- 76 Firmware upgrade
- 77 Logfile
- 78 License
- 79 Sound files
- 80 TECHNICAL PARAMETERS
- 82 Requests
- 83 GENERAL INSTRUCTIONS AND CAUTIONS
- 84 (GPL)