advertisement
Security applications
Multiple 3-MODCOM modules
You can install more than one 3-MODCOM Modem
Communicator module in a system. Two or more 3-MODCOM modules can be installed in the same cabinet. Two or more cabinets can contain 3-MODCOM modules.
There are several reasons for using multiple 3-MODCOMs:
• Redundant communication to a CMS
• Backup of critical communication links
• Dedicated security transmission hardware
In a redundant communication system both 3-MODCOMs are programmed to transmit the same message to different receivers at the CMS or at different CMS installations.
One 3-MODCOM can be programmed to back up another. This guarantees CMS communication (or TAP paging) should one panel in the system become disabled.
In a multiple tenant application, there may be a high volume of
ACDB/KDC program traffic. You can design such systems with a second 3-MODCOM, dedicating the first module to
ACDB/KDC traffic, and the second module to CMS transmissions. This prevents contention for communication channels.
Overall limits for the number of 3-MODCOM modules are:
• 10 modules per node
• 10 modules total per network
2.12 EST3 Installation and Service Manual
advertisement
Related manuals
advertisement
Table of contents
- 18 System description
- 19 System features
- 20 Minimum system requirements
- 20 System construction
- 22 Audio subsystem description
- 22 Network audio riser wiring
- 23 Amplifiers
- 24 Backup amplifiers
- 25 3-ASU Audio Source Unit
- 31 Firefighter phone
- 32 Digital network subsystem
- 32 Network data riser wiring
- 32 Class B network data risers
- 33 Class A network data risers
- 34 Download connections
- 35 Downloading database files over the network
- 38 Foreign language support
- 38 Printer use with foreign languages
- 38 Bilingual language support
- 39 Display device language support
- 42 Signature series devices
- 45 Network applications
- 45 Network layout
- 46 Feature/function domain
- 49 Audio applications
- 50 Audio channels
- 54 Manual audio zone selection
- 55 Messages
- 58 Firefighter phone system
- 58 Five phone off-hook limit
- 58 One phone per circuit
- 59 Five phones per circuit
- 59 Limited number of portable telephone handsets
- 62 Security equipment
- 68 Certificate installations
- 72 Multiple 3-MODCOM modules
- 73 Multiple site security and access
- 76 Multiple tenant security
- 80 Secure access
- 82 Access control equipment
- 91 Anti-passback
- 94 Central monitoring station
- 96 Common door access
- 98 Delayed egress
- 101 Elevator control
- 104 Emergency exit door
- 106 Handicap access door
- 108 Maglock peripherals
- 110 Multiple card readers
- 112 Muster
- 115 Power for continuous locks
- 117 Power for intermittent locks
- 119 Power from an AC source
- 122 Power from a remote source
- 125 Remote controls
- 127 Two-person rule
- 132 Equipment required
- 133 ATPC Amplifier Terminal Panel Cabinet
- 133 Overview
- 133 Equipment racks
- 136 ATP Amplifier Terminal Panel
- 137 Battery backup
- 138 Audio amplifiers
- 140 URSM Universal Riser Supervisory Module
- 140 Application
- 141 Installation
- 141 Terminal connections
- 141 Operation
- 143 ATP installation
- 144 ATP wiring
- 144 ATP terminal connections
- 145 ATP jumper settings
- 145 3-ATPINT terminal connections
- 146 3-ATPINT jumper settings
- 150 ATP external battery charger
- 152 Amplifier backup
- 155 Branch speaker wiring
- 157 Troubleshooting
- 161 Installation overview
- 161 Electrostatic discharge precaution
- 161 Energized system precaution
- 161 Circuit compatibility
- 162 Recommended cable manufacturers
- 164 UL 864 NAC signal synchronization
- 164 Requirements
- 166 Typical circuits
- 174 Creating an initial startup version of the project database
- 176 System installation sequence
- 177 Preliminary field wiring testing
- 180 Chassis installation in EIA 19-inch racks
- 181 ATCK Attack Kit for cabinets
- 182 Local rail module installation
- 184 3-MODCOM Modem Communicator module
- 184 Features
- 185 Functions
- 186 Equipment
- 187 Configuration options
- 188 Failover operation
- 190 Compatibility
- 190 Transmission protocols
- 191 Transmission process
- 193 Programming considerations
- 194 Installation
- 198 3-SAC Security Access Control module
- 198 Product description
- 198 SAC bus
- 198 Recommended cabling
- 198 Additional power supply wiring
- 199 3-AADC1 Addressable Analog Driver Controller and IRC
- 200 AC power and DC battery wiring
- 202 Connecting auxiliary/booster power supplies
- 202 Installation
- 202 Configuration
- 204 Connecting the PT-1S impact printer
- 206 System printer power supply
- 207 Adjusting amplifier output levels
- 207 What you will need
- 207 Adjustment procedure
- 207 Design considerations
- 208 Connecting a CDR-3 Zone Coder for coded tone output
- 208 What you will need
- 208 Adjusting the gain on the 3-ASU auxiliary input
- 211 Diagnostics Utility
- 213 Running the RPM and distributing profiles
- 217 Cabinet power-up procedure
- 217 Initial power-up
- 218 Runtime and system errors
- 218 Introduction
- 218 Runtime errors
- 219 System errors
- 220 Initial and reacceptance test procedures
- 220 Introduction
- 221 Control and emergency communications equipment testing
- 221 Primary power supplies
- 221 Booster power supplies
- 222 CPU with LCD module
- 224 3-RS232 card installed in CPU
- 224 3-RS485 card installed in CPU, Class B configuration
- 225 3-RS485 card installed in CPU, Class A configuration
- 225 3-IDC8/4 Initiating Device Circuit module
- 225 3-SSDC(1) Signature Driver Controller module
- 226 module
- 226 3-OPS Off-premises Signaling module
- 228 3-ASU Audio Source Unit
- 228 3-FTCU Firefighter Telephone Unit
- 230 3-ZAxx Audio Amplifiers
- 230 Control/display modules
- 231 Amplifier transfer panel (ATP)
- 232 Detector, input module, and output module testing
- 232 module circuit
- 233 circuit
- 233 modules
- 233 UM modules
- 234 Signature series input modules
- 234 Signature series output modules
- 235 Initiating device testing
- 235 Manual stations
- 235 Nonrestorable heat detectors
- 235 Restorable heat detectors
- 235 Waterflow switches
- 237 Notification appliance testing
- 237 Visual devices
- 237 Speakers
- 237 Bells and horns
- 238 Record of completion
- 242 General
- 243 Preventive maintenance schedule
- 245 Signature device routine maintenance tips
- 245 Detectors
- 245 Modules
- 246 Signature detector cleaning procedure
- 247 System trouble and maintenance log
- 251 Overview
- 251 Maintenance philosophy
- 251 Problem classification
- 251 Handling static-sensitive circuit modules
- 252 Removing or replacing circuit modules
- 252 Recommended spares list
- 253 Hardware problems
- 253 Identification
- 253 Isolation
- 253 Substituting hardware
- 254 Adding hardware
- 254 Downloading problems
- 255 Modules
- 255 Rail signals
- 255 3-PPS/M Primary Power Supply module
- 257 3-BPS/M Booster Power Supply module
- 257 CPU Central Processor module
- 261 3-FIBMB fiber optic interface
- 262 Signature Controller modules
- 262 Control / display modules
- 263 Audio amplifier modules
- 264 3-OPS Off-Premises Signal module
- 264 3-IDC8/4 Initiating Device Circuit module
- 265 3-LDSM Display Support module
- 265 3-MODCOM(P) Modem Communicator module
- 266 Common causes of problems
- 268 Audio components
- 268 3-ASU Audio Source Unit
- 269 3-FTCU Firefighter Telephone Control Unit
- 269 SIGA audio amplifiers
- 272 Pseudo point descriptions
- 283 Signature data circuit (SDC) operation
- 285 Basic Signature data circuit troubleshooting
- 285 Isolating circuit and device problems
- 285 Open circuit conditions
- 286 Short circuit conditions
- 287 Ground fault conditions
- 289 Substituting known good Signature series devices
- 295 Signature controller modules
- 295 Substituting Signature controller modules
- 295 Mapping errors
- 297 Device troubleshooting
- 299 Signature diagnostic tools
- 299 Using Signature diagnostics
- 300 Signature diagnostic sequence
- 300 Displaying mapping errors
- 303 Displaying device chain errors
- 305 Using the chain lists
- 305 Displaying message counters
- 307 Displaying device trouble
- 310 Displaying trouble tables
- 313 DSDC status
- 313 Introduction
- 313 Setting up the System Definition Utility program
- 313 Using DSDC status
- 313 Displaying the current SDC status
- 315 Displaying a log of current SDC status events
- 316 Displaying the SDC in-process progress chart
- 318 Addressable analog diagnostic tools
- 318 System definition utility
- 320 Problem solving hints
- 322 3-AADC1 Addressable Analog Driver Controller
- 322 Substituting 3-AADC1 local rail modules
- 323 Addressable analog device troubleshooting
- 325 Wiring problems
- 326 Correcting addressable analog circuit wiring problems