MGate MB3000 Modbus Gateway User`s Manual

MGate MB3000 Modbus Gateway Configuring the Modbus Gateway

When the search is complete, every MGate MB3000 that is found on the LAN will appear in the window with MAC address and IP address. Simply select the one that you wish to configure.

Specify IP Address

Click Specify IP Search Address if you know the IP address of the unit and wish to connect to it directly.

Enter the unit's IP address and click OK.

9-8

MGate MB3000 Modbus Gateway Configuring the Modbus Gateway

If the search is successful, the unit will be listed in MGate Manager. Click the unit to begin configuration.

ATTENTION

If Search IP Address fails to locate the MGate MB3000, the IP address that you entered might be incorrect. Try doing the search again and re-entering the IP address carefully.

Another possibility is that the MGate MB3000 is located on the same LAN as your PC, but on a different subnet.

In this case, you can modify your PC’s IP address and/or netmask so that it is on the same subnet as the MGate

MB3000. After your PC and the MGate MB3000 are on the same subnet, MGate Manager should be able to find the unit.

9-9