advertisement
▼
Scroll to page 2
of 86
MGate MB3000 Modbus Gateway Configuring the Modbus Gateway
Open Traffic Monitor Window
Select the unit that you wish to monitor and click Monitor to open the Traffic Monitor window.
In the Traffic Monitor window, click Start to begin live monitoring of the data passing through the selected
MGate MB3000 unit.
9-27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 Seamless integration of Ethernet and serial Modbus devices
- 6 Powerful operation modes to handle almost any Modbus application
- 6 Windows utilities for easy setup and traffic monitoring
- 9 RS-485 Termination and Pull High/Low Resistors
- 10 Connecting to a Host or the Network
- 10 Installing the Software
- 10 Mounting the Unit
- 15 DB9 (Male)
- 21 DB9 (Male)
- 33 Terminal Block (RS-422, RS-485)
- 34 Power Input, Relay Output
- 40 DB9 (Male)
- 40 Power Input, Relay Output
- 43 Connect all Modbus devices over an Ethernet network
- 43 Link a serial master device with Ethernet slave devices
- 44 Link TCP master devices with both ASCII and RTU serial devices simultaneously
- 44 Let Modbus serial devices communicate over the Internet
- 50 Change Language Setting
- 51 Broadcast Search
- 52 Specify IP Address
- 54 Configure Serial Port for RTU or ASCII, Master or Slave
- 55 What is ProCOM?
- 55 How to Configure ProCOM for the MGate MB3000
- 57 Offline Open
- 58 Configure IP Address and Other Network Settings
- 59 Configure Serial Communication Parameters
- 60 RTS Toggle
- 61 Set Up Slave ID Mapping (Smart Routing)
- 61 How Slave IDs are Mapped on the MGate MB3000
- 62 How Slave ID Map is Defined
- 62 Slave ID Map Example
- 62 Customize Modbus Settings
- 63 Initial Delay
- 63 Modbus TCP Exception
- 63 Slave Channel and Response Timeout
- 63 Inter-Character Timeout
- 63 Inter-Frame Delay
- 65 Set Up Priority Control
- 66 Accessible IP
- 67 SNMP
- 68 Miscellaneous Setup
- 71 Open Traffic Monitor Window
- 72 Filter Traffic Information
- 73 Save Log to File
- 75 MXview for the MGate MB3000 Series
- 83 Normal
- 84 Exception
- 84 Broadcast
- 84 Response Timeout